Soap Dispenser Maintenance

	Express® Lavatory System SS-Series
Installation Instructions - For Service Only	SS-3/AST/STD, SS-3/AST/JUV

Step 1: Fill soap dispensers

The two soap valves will dispense vegetable/coconut oil liquid soaps, synthetic detergents, vis- cous lotion soaps, and antiseptic solutions. A 10-15% concentration is recommended for vege- table or coconut oil liquid soaps. Synthetic detergents, lotion soaps, and antiseptic soaps require no dilution.

1.Using two screwdrivers (or similar tool), push up on the release tabs located beneath each soap dispenser and pull out the soap tanks from the sprayhead (see Figure 8a).

2.To remove packing dust, rinse out each soap tank with hot water. Shake water out thoroughly and allow to dry.

3.Pour the soap into each soap tank's filler hole (see Figure 8b).

4.After each soap tank is filled, position the soap tanks into the sprayhead openings and push into place.

Figure 8a

FILLER HOLE

(2)SOAP TANK 133-107 (GRAY)

133-131 (PUTTY)

Figure 8b 133-131A (COAL)(2) SOAP DISPENSER VALVE S09-007

Bradley Corporation • 215-1238 Rev. C; EN 03-813

5/11/04

Bradley Smoker SS-3/AST/JUV, SS-3/AST/STD Soap Dispenser Maintenance, Fill soap dispensers

Models: SS-3/AST/JUV SS-3/AST/STD