Pre-Lift Operation Notes and Details
Folding the platform fully first will ensure that the
WARNING
Discontinue lift use immediately if any lift component does not operate properly. Failure to do so may result in serious bodily injury and/or property damage.
Bridge Plates and Inboard Roll Stops: L915 Series lift models are available with an automatic inboard roll stop that also serves as the bridge plate (“IB” lift models), or a combina- tion stationary inboard roll stop and an independent hinged bridge plate
Automatic Inboard Roll Stop and Bridge Plate: L915 “IB” lift models are equipped with an automatic inboard roll stop that also serves as the bridge plate (automatic inboard roll stop photos on page 18).
When the UNFOLD switch is
pressed and the platform unfolds from stow position to floor level, this mechanical roll stop/bridge plate is automatically deployed to the bridging (horizontal) position to provide a bridge plate between the platform and the lift base plate (vehicle floor). The inboard edge of the bridge plate rests on the lift base plate.
The mechanical roll stop/bridge plate automatically folds (rotates) to the vertical (roll stop) position when the platform lowers to the ground (DOWN switch is pressed).
As the UP switch is pressed and the platform raises from ground level, the roll stop automatically unfolds (rotates) to the horizontal
Page 17
