Pre-Lift Operation Notes and Details
photo below right). The bridge plate bridges the gap between the platform and the lift base plate when the platform is fully raised (at floor level), providing a surface for wheelchair travel.
The bridge plate unfolds (rotates) to the horizontal position (rests on
platform) when the platform unfolds from stow position to floor level (UNFOLD switch is pressed).
The bridge plate folds (rotates) to the vertical position when the platform folds (FOLD switch is pressed).
Bridge plate at floor level.
Fixed Inboard Roll
Stop “non-IB”
WARNING
Discontinue lift use immediately if any lift component does not operate properly. Failure to do so may result in serious bodily injury and/or property damage.
Independent Hinged
Bridge Plate
Page 19
