Direction: The terms "left (rear)," "right (front)," "inboard," and "outboard" will be used through- out this manual to indicate direction (as viewed from outside the vehicle looking directly at the lift). Refer to the Lift Terminology Illustrations for clarification of direction terms.
Lift Components
Refer to the Lift Terminology Illustrations on pages 6 and 7.
Pump Module: The
Hand-Held Switch Control Box:
Lift Terminology
The
The control box is equipped with two
Lift Frame: The lift frame consists of the base plate, two towers, the parallel arms, the vertical arms, platform pivot arms and the handrails. The two main
hydraulic cylinders are housed in the parallel arms. The electrical/ hydraulic powered lift frame components mechanically unfold, lower, raise and fold the lift platform assembly.
Platform Assembly: The lift platform assembly consists of the steel tubing frame with grating surface upon which the wheel- chair is positioned, the outboard roll stop, roll stop latch, the inboard roll stop (fixed inboard roll stop models only), and the hydraulic cylinder assembly that powers the outboard roll stop.
Page 3
