Braun 6 manual Fully-Folded Disengaged Roll Stop

Pre-Lift Operation Notes and Details

Lift Features (continued)

Automatic Outboard Roll Stop (ARS): This cylinder-powered roll stop provides a ramp for wheel- chair loading and unloading at ground level (see photos below). When the platform lowers fully to ground level, the cylinder com-

pression spring automatically unfolds (rotates) the roll stop to the ramp position (fully unfolded).

Although the outboard roll stop is lift-powered, the activation of the roll stop is controlled by the lift operator (attendant). Pressing the DOWN switch deploys

(unfolds) the roll stop. The roll stop is cylinder-powered to automatically fold (rotate) to the vertical position as shown when the UP switch is pressed (roll stop raises before platform raises).

Discontinue lift operation immediately if the roll stop does not operate properly.

Fully-Engaged Roll Stop Latch

Latch Foot 2"

Fully-Unfolded Roll Stop (Ramp position)

Outboard Roll Stop

Fully-Folded	Disengaged
Roll Stop	Roll Stop
(Up-vertical)	Latch

Note: Platform must raise approximately two inches before latch engages fully.

Page 20