Ricoh 350e, 450e manual Starting the Machine, Turning On the Power, Power switches

1. Basics

Starting the Machine

To start the machine, turn on the op- eration switch.

Note

❒This machine automatically enters Energy Saver mode or turns itself off if you do not use the machine for a while. See “09. Energy Saver Mode”, “10. Auto Off Timer” of the System Settings.

-Power switches

This machine has two power switch- es: See ⇒ P.2 “Guide to Components”.

❖Operation switch (right side of the op- eration panel)

Turn on this switch to activate the machine. When the machine has warmed up, you can make copies.

Turning On the Power

AMake sure that the power cord is plugged into the wall outlet firm- ly and the Main Power indicator is lit.

BPress the operation switch to make the On indicator light up.

Main

Power

On

r / Stop

ND1M01EE

The panel display will come on.

❖Main power switch (left side of the ma- chine)

Do not touch the main power switch. It should be used only by a service representative.

Important

❒If you leave the main power switch off for more than about one hour, all fax files in memory will be lost. See “Turning Off The Power” of the Facsimile Reference.

Note

❒During the warm-up period,

you can use the Auto Start func- tion. See ⇒ P.60 “Auto Start— Entering Copy Job Settings Dur- ing the Warm-up Period”.

❒Warm-up period is as follows:

•Type 1: less than 85 seconds

•Type 2: less than 100 seconds

17