Ricoh 450e, 350e manual Program-Storing your Copy Settings in Memory, Storing Your Settings

Copying

Program—Storing your Copy Settings in Memory

2

You can store frequently used copy job settings in machine memory, and recall them for future use.

❖ Storing Your Settings

You can store your settings you frequently use.

❖ Deleting A Program

You can delete a stored program.

Storing Your Settings

You can store settings you frequently use.

AEdit the copy settings so that all functions you want to store in this program are selected.

BPress the {Program} key.

❖Recalling A Program

You can recall a stored program.

Note

❒You can store up to ten programs.

❒You can select the standard mode or program No.10 as the mode to be set when modes are cleared, the machine is reset, or immediately after the operation switch is turned on.

❒Paper settings are stored based on paper size. So if you place more than one paper tray of a same size, the paper tray prioritized with the user tools will be selected first. See “12. Pap.Tray Priority” of the Sys- tem Settings.

❒Programs are not cleared by turn- ing the power off or by pressing the {Clear Modes/Energy Saver} key. They are canceled only when you delete or overwrite them with an- other program.

Program		Clear Modes /	C	Interrupt
		Energy Saver
eed Dial	1	2	3	ND2R01EE

CPress the [Store] key.

ND2C0101

DSelect the program number you

want to store these settings in with the <> keys. Then, press the [OK] key.

When the settings are successfully stored, the m indicator appears.

ND2C0109

56