Series/Booklet Copies—Making One-Sided Copies from Various Originals And making Various Copies from a Bound Original

If the calculated ratio is under the minimum ratio, it is corrected within the range of the ratio auto- matically. However, with some ra- tios, parts of the image might not be copied or blank margins appear on copies.

Separation line between originals

can be printed with the user tools. See “6. Combine Copy” in ⇒ P.151 “2. Adjust Image 2/2.

Even if the direction of originals is different from that of the copy pa-

per, the machine will automatical- ly rotate the image by 90° to make copies properly.

You can make copies even if the number of originals is less than the number required in the selected mode. You can also disable this

function with the user tools. See “2. Comb. Auto Eject” in ⇒ P.154 “3. Input/Output 1/2.

AIf Duplex mode is selected, press the {Duplex} key to cancel the mode.

BPress the {Menu} key.

CPress the [Next] key until the

[Series / Booklet] is displayed.

2

ND2C0102

DSelect [Series / Booklet] with the <>keys. Then, press the [Select] key.

ND2C0109

ESelect the [16 pg Booklet] with the <> keys. Then, press the

[OK] key.

ND2C0109

FSet your originals, then press the {Start} key.

Note

If you have not changed the de- fault setting, press the 1 {Series / Booklet}key. Go to step E.

83

Page 109
Image 109
Ricoh 350e, 450e manual Series / Booklet is displayed, Select the 16 pg → Booklet with the keys. Then, press