Ricoh 350e, 450e manual Mixed Size Mode, Press the Mixed Original Sizes key

Setting Originals

Note

❒To deselect [Thin Paper], press the [Select] key again.

EPress the [Exit] key.

ND2C0103

Mixed Size Mode

When originals of different sizes are set on the document feeder at the same time, the machine automatically checks the size of the originals and makes copies.

Limitation

❒When setting originals of different sizes on the document feeder and making copies without using Mixed sizes mode, parts of the original image might not be cop- ied.

❒The weight of originals that can be set with this function is 52 – 81g/ m2, 14 – 20 lb.

❒The paper sizes that can be set with this function are as follows:

Metric version	B5 – A3
Inch version	51/2" × 81/2" – 11"
	× 17"

❒You can set originals of two differ- ent sizes at a time.

❒Copying speed and scanning speed will be reduced.

❒For smaller originals, the copy im- age might be slanted since the orig- inals might not be correctly aligned with the original guide.

Note

❒This key is not used when sending a fax message in Mixed size origi- nals. Switch to Facsimile mode and set Mixed size originals. See “Scan- ning in Mixed Sized Originals” in the Facsimile Reference.

A Press the {Mixed Original Sizes}key. 2

BAlign the rear and left edges of the originals as shown in the il- lustration.

1	B4	A3
		2

CP19AE

1:Set into the document feeder (ADF).

2:Vertical size

Important

❒If the originals are of different vertical sizes, put the longer original on the bottom; other- wise the original size might not be detected correctly.

CAdjust the guide to the widest original size.

DSet the aligned originals face up into the document feeder.

33