Ricoh 450e Setting Originals Document Feeder, Setting a stack of originals in the document feeder

Copying

Setting Originals in the

Document Feeder

Note

❒Do not stack originals above the limit mark.

2	❒ The last page should be on the bot-
	tom.

❒When copying thin originals (41 – 52g/m2, 11 – 14 lb), select [DF Set- ting] and set to Thin Paper mode, or set your originals on the expo- sure glass to avoid damage due to a multi-sheet feed (if several sheets

are fed together at the same time). See ⇒ P.32 “Thin paper mode”.

❒The original might become dirty if it is written with a pencil or similar tools.

❒For 1-sided originals, you can se- lect the ADF trayor the ADF exter- nal tray as an output tray. See “22. ADF Orig. Ejection” in the System Settings.

Setting a stack of originals in the document feeder

AAdjust the guide to the original size.

BSet the aligned originals face up into the document feeder.

1	2
	ND1D01EE

1:Limit mark

2:Document guide

Note

❒To avoid a multi-sheet feed, shuffle the originals before set- ting them in the document feed- er.

1 2

ND1D04EE

1:ADF tray

2:ADF external tray

❒Copying or scanning speed might be a little reduced if the ADF tray is selected as an output tray.

Reference

Regarding originals that the docu- ment feeder can handle, see ⇒ P.20 “Originals”.

30