Staple, Metric version | Ricoh 450e, 350e specification

Copying

CAfter all originals are scanned, press the {#} key.

The copies are delivered to the tray.

When setting a stack of originals in the document feeder in SADF

2 mode

Reference

⇒P.31 “SADF mode”

ASet an original in the document feeder, then press the {Start} key.

Note

❒Start with the first page to be copied.

BSet the next original.

CAfter all originals are scanned, press the {#} key.

The copies are delivered to the tray.

Staple

The optional finisher is required to use this function.

Each copy set can be stapled together.

Limitation

❒You cannot use the following pa- per in this function:

•Post cards

•Translucent paper

•OHP transparencies

•Adhesive labels

•Curled paper

•Low stiffness paper

•Paper of different sizes

Note

❒For this mode, the following limi- tation applies. When the number of copies exceeds the tray capacity, copying stops. In this case, remove the copies from the shift tray and then resume copying.

❖ Metric version

	1000-sheet		3000-sheet
	finisher		finisher

Paper	A3L, B4L,		A3L, B4L,
size	A4KL,		A4KL,
	B5K		B5KL

Stapler	•	A4 or	•	A4 or
capacity		smaller:		smaller:
		30 sheets		50 sheets
		(80g/m2)		(80g/m2)
	•	B4 or	•	B4 or
		larger: 20		larger: 30
		sheets		sheets
		(80g/m2)		(80g/
				m2)(with-
				out
				punch)

Shift tray	1,000 sheets		3,000 sheets
capacity	(80g/m2)		(80g/m2)
(A4K)

46

Image 72

Ricoh 450e, 350e manual Staple, Metric version

Contents

350e/450e Overseas Affiliates Page FCC Requirements 355e/455e 355e/455e Operating Instructions Page FCC Requirements Page Savin Corporation Page FCC Requirements Safety Information Safety During OperationPage Iii Page Page How to Read this Manual SymbolsPreparation Limitation Vii What you can do with this Machine Copy Mode ViiiPage Table of Contents Program-Storing your Copy Settings in Memory Sort/Stack/StapleCopying from the Bypass Tray Other Functions Combination Chart 106 Accessing the User Tools Copy Features 141Image Repeat-Repeating an Image If Your Machine does not Operate as You Want 109 Dos and donts 157 Where to Put your Machine 158 Maintaining your Machine 161176 Xiii Xiv Machine Types Guide to Components Operation panel Duplex unit Unit for two-sided copiesFront cover Bypass tray Guide To copy onto A3, 11 × 17 paperVentilation hole If the end of the sheet is curled Options Function List Based on Options Place originals On the exposure glass Document feeder Place originals On the exposure glass Document feeder This page is intentionally blank Operation Panel Program keyUser Tools/Counter key Clear Modes/Energy Saver key Mixed Sizes key Auto Reduce/Enlarge keyOriginal Type key Keys Cursor keys Number keysStart key Clear/Stop key Panel Display Displays and Key OperationsCopy initial display Displays items which can be se- lected or specified Display when copying Function menu displayCommon keys Display Panel Layout Sample Display for Erasing the Center/BorderPage Turning On the Power Power switchesOperation switch right side of the op- eration panel Main power switch left side of the ma- chine Turning Off the Power When the Clear Modes/Energy Saver indicator is litWhen the machine is set for user codes Press the operation switch to make the On indicator go off Changing Modes Sizes and Weights of Recommended Originals OriginalsMetric version Inch version Sizes Difficult to Detect Sizes detectable by the Auto Paper Select Metric version Original Sizes and Scanning Area/Missing Image Area Exposure glass Document feeder Copy Paper Recommended Paper Sizes and Types Non-recommended Paper Paper Storage Toner Handling TonerToner Storage Used Toner Basic Procedure Make sure that the machine is in Copy modeMake sure that there are no previ- ous settings remaining Set your originals Auto Reset Auto Off Setting Originals Setting Originals on Exposure GlassLift the platen cover or the docu Ment feeder Lower the platen cover or the doc- ument feeder Setting Originals Document Feeder Setting a stack of originals in the document feeder Using Sadf and Thin Paper Modes Sadf modePress the Select key Press the Exit key Thin paper mode Set the next original while the Auto Feed indicator is litSelect Thin Paper with the keys, then press the Select key Mixed Size Mode Press the Mixed Original Sizes key Adjusting Copy Image Density Basic Functions Selecting Original Type Setting Selecting Copy Paper Auto Paper SelectManual Paper Select Select the copy paper Auto Paper Select Manual Paper SelectRotate Copy Make sure that the Auto Auto Paper Select is selected Where Original is Original size and direc Set Tion Machine Choose Reproduction Ratios Basic Functions Sort/Stack/Staple SortStack Staple the optional 1000-sheet finish- er required Sort/Stack/Staple Sort-Sorting into Sets 123, 123 Sort Rotate Sort Shift SortShift Sort optional finisher required When setting a stack of originals in the document feeder When setting an original on the exposure glassReference Limitation Punch key Stack-Stacking Together All Copies of a Page 111, 222 Rotate Stack Shift StackRotate Stack Shift Stack optional finisher re- quired Press the Sorter key until the Stack indicator bottom is lit Make sure that on is selected. Then, press the OK key Staple Stapling position and original setting Sheet finisher Metric version Inch version 81/2 × Select one of four stapling posi- tions Press the OK keySet the next original When memory reaches 0% To stop scanningTo resume scanning To clear scanned images of the originals Adjust the guides to the copy pa- per size Copying from the Bypass Tray When copying onto non-standard size copy paper Make sure the k indicator is selected Press the OK keyPress the # key Press the Ppr. Size key When copying onto standard size copy paper Make sure the k indicator is selectedPress the Exit key Press the Ppr. Size key Press the ↓Next key until your desired size is displayed Select the desired size with the keys, then press the OK key Set your originals, then press the Start key Press the # key. Press the Ppr. Type key Select OHP or Thick Paper with the keys. Then, pressOK key Select the paper size, then press the OK key Program-Storing your Copy Settings in Memory Storing Your SettingsStoring Your Settings Deleting a Program Deleting a Program Press the Delete keyNo key Recalling a Program Other Functions Energy Saver Mode-Saving EnergyWhile a document is being fed Press the Interrupt key User Codes Original BeeperPress the Interrupt key. The Interrupt key lights Set your original Press the Start key Original → Copy paper Ratio % Size Ratio% Original → Copy paper Size When using the n or o key When using the number keysZoom-Reducing and Enlarging in 1% Steps Set your originals, then press the Start key Press the Menu key Press the Select key To change the value entered Horizontal % Vertical % ND2C0104 Margin Adjustment-Adjusting the Margin Press the Menu keySelect Left left margin or Right right margin with the keys Enter the desired margin width with the number keys Enter the desired margin width the number keys. Then, press Erase Center/Border-Erasing the Center and the Border Erase CenterErase Border Center Border Center Set your originals, then press the Start key Combine-Combining Originals into One Copy Pages→1-sidedPages→1-sided Pages→2-sided Pages→1-sided, 4 pages→2-sided One-sided originals are copied onto one side of a sheet Portrait K originals Press the ↓Next key until the Combine is displayed When setting a stack of original in the document feeder Set the next original, then press the Start key Book → 1-Sided Pages→MagazinePages→Booklet Sided → 1-Sided The optional doc- ument feeder is required With the optional document feeder Without the optional document feederPress the ↓Next key until Series Booklet is displayed Select Book → 1-Sidedwith the keys. Then, press the OK key Press ↓Next key Until Select How to fold and unfold copies to mark a magazine Portrait PortraitLandscape Pages → Booklet-Making Booklet from One-sided 16 Originals Select the 4pg→Magazine with the keys. Then, press Series / Booklet is displayed Select the 16 pg → Booklet with the keys. Then, press Making a booklet Duplex-Making Two-Sided Copies Sided → 2-sidedBook → 2-sided Originals and copy direction Original direction and completed copies Specifying Orientation of Bound Originals Set the next original Then Press the Start key Original Copy paper Optional document feeder is re- quired to use this function Cover/Paper Designate-Adding or Inserting Sheets Copy Blank Press the Front key Press the Both key Press the Ppr. Des. key To specify another page number, repeat Step E ND2C0104 OHP Slip Sheet-Copying or Inserting Slip Sheet ND2C0109 Positive/Negative-Copying Complementary Colors Image Repeat-Repeating an Image Image Twice on OneImage Repeat Original 51/2 × 81/2K/Copy paper Original image is copied repeatEdly Press the ↓Next key until Image Repeat is displayed 81/ L/Copy paper 81/ × 11K 100Press the ↓Next key until Image Set your original, then press the Start key Storing the Images Storing The ImagesDeleting The Stored Images Recalling The Stored Images To overwrite images already stored 102Select the type of originals with the keys. Then, press Deleting the Stored Images 103Start with the first page of your Originals File is displayed Printing a List of the Stored Images 104Press the List key Recalling the Stored Images 105Select the 8pages→1sided or 16pages→2sided with Combination Chart 106 Combination Chart 107 108 If Your Machine does not Operate as You Want Message109 Display 110 If you cannot Make Clear Copies 111 Adjust Image If you cannot Make Copies as you Want112 Combine, Series/Booklet 113 Duplex 114 Loading Paper Loading Paper in the Large Capacity Tray115 Press the Downkey if it is not lit 116 Place the paper in the tray along the edge on the leftClose the top cover Adding Toner 117 118 119 Clearing Misfeeds 120 121 122 123 When R is lit 124 125 126 127 Changing the Paper Size 128Fasten the fences with screws To adjust the paper size Adjust the back fence to the new paper size129 Adding Staples Sheet Finisher130 131 132 133 134 Removing Jammed Staples 135 136 137 138 139 Reinstall the punch waste box Removing Punch Waste140 Pull out the punch waste box and remove punch waste Accessing the User Tools Copy Features 141Press the User Tools/Counter key Exiting from User Tools 142 143 User Tools Menu Copy Features 144 145 Settings you can Change with the User Tools General Features 1/4146 General Features 2/4 147 General Features 3/4 General Features 4/4148 Adjust Image 1/2 149 150 Adjust Image 2/2 151 152 153 Bound Original Input/Output 154 Input/Output 155 Shortcut Keys 156 Dos and donts 157 Where to Put your Machine Machine EnvironmentOptimum environmental conditions Environments to avoid Power Connection 159 Access to Machine 160 Cleaning the Platen Cover Cleaning the Document FeederCleaning the machine Maintaining your Machine 162 Mainframe Copy paper weight Copy paper sizeNon-reproduction area First copy time Power consumption Reproduction ratioContinuous copying count Copy paper capacity Dimensions W × D × H up to exposure glass Space for main frame W × DNoise Emission 166 Weight 167 Document Feeder Option Paper Tray Unit Option Available paper sizePaper capacity 169 Internal Tray 2 1bin Tray Option Number of bins Available paper size170 Sheet Finisher Option 172 173 Punch Kit Option Paper size 2 holes versionPaper size 3 holes version 174 Large Capacity Tray LCT Option 175 Index 176 177 178