Copying

ESelect the desired size with the <> keys, then press the [OK] key.

2

ND2C0109

ND2C0109

ND2C0109

FPress the [Exit] key.

ND2C0104

Note

When copying onto OHP

transparencies or thick pa- per. ⇒ P.54 “When copying onto OHP transparencies or thick paper”

ESet your originals, then press the {Start} key.

When copying onto OHP transparencies or thick paper

To make copies onto OHP transpar- encies or thick paper, you need to specify the paper type.

Note

Select [Thick Paper] if the paper weight is more than 91g/m2 (20 lb).

AIf Duplex mode is selected, press the {Duplex} key to cancel the mode.

BOpen the bypass tray, and adjust the guides to the paper size.

Important

If the guides are not flush with the copy paper, a skew image or paper misfeeds might occur.

CLightly insert the OHP transpar- encies or thick paper face down until the beeper sounds.

The k indicator on the display is automatically selected.

ND5H05EE

Note

When you set a OHP transpar- encies, make sure that its front and back faces are properly po- sitioned.

To avoid paper misfeeds, shuf- fle a stack of paper before set- ting it in the tray.

54

Page 80
Image 80
Ricoh 450e Select the desired size with the keys, then press the OK key, Set your originals, then press the Start key