Setting Originals

Using SADF and Thin Paper Modes

SADF mode

If you set one set of originals at a time in the document feeder, the second and subsequent originals can be fed automatically without pressing the {Start}key.

Limitation

Copying or scanning speed might be a little reduced.

Up to 50 standard originals can be set in the document feeder at a time. If there are more than 50 orig- inals, set SADF mode so that origi-

nals can be fed automatically without pressing the {Start} key each time they are set in the docu- ment feeder.

APress the {Menu} key.

BPress the [Next] key until [DF Set- ting] is displayed.

CSelect [DF Setting] with the <> keys, then press the [Select] key.

2

ND2C0109

DPress the [Select] key.

ND2C0104

Note

To deselect [SADF], press the [Select] key again.

EPress the [Exit] key.

ND2C0103

FSet one original face up into the

document feeder. Then, press the {Start} key.

The Auto Feed indicator is lit.

ND2C0102

31

Page 57
Image 57
Ricoh 350e, 450e manual Using Sadf and Thin Paper Modes, Sadf mode, Press the Select key, Press the Exit key