Copying
522
Note
❒Do not stack paper over the lim-
it mark; otherwise a skew image
or paper misfeeds might occur.
❒If the beeper is turned off, light-
ly insert the copy paper until it
stops. See “Settings You Can
Change With The User Tools”
in the System Settings.
❒When the platen cover is open,
set the direction of the copy pa-
per to L.
❒Swing out the extender to sup-
port larger size copy paper
(larger than A4L, 81/2" × 11"L.
❒Fan paper to get air between the
sheets and avoid a multi-sheet
feed.
When copying onto non-standard size copy paperImportant
❒You should specify the size of
copy paper to avoid paper mis-
feeds.
AMake sure the k indicator is
selected.
BPress the {
#
} key.
CPress the [
Ppr. Size
] key.
DPress the [
OK
] key.
EEnter the vertical size of the pa-
per with the number keys, then
press the {
#
} key.
Note
❒To change the number en-
tered, press the {
Clear/Stop
}
key and enter the new num-
ber.
FEnter the horizontal size of the
paper with the number keys,
then press the [
OK
] key.
Note
❒To change the number en-
tered, press the {
Clear/Stop
}
key and enter the new num-
ber.
❒When you specify the paper
size, ! appears on the dis-
play to indicate bypass tray
copying.
ND2C0101
ND2C0104
ND2C0104