Other Functions
59
2
Other Functions

Energy Saver Mode—Saving

Energy

If you do not operate the machine for
a certain period after copying, or
when you press and hold the {
Clear
Modes/Energy Saver
} key for more than
one second, the display disappears
and the machine enters Energy Saver
mode. When you press the {
Clear
Modes/Energy Saver
} key again, when
the originals are set in the document
feeder, or when the platen cover or
document feeder is opened, the ma-
chine returns to the ready condition.
In Energy Saver mode, the machine
uses less electricity.
The Energy Saver mode makes a two-
step reduction in electricity: one for
the period up to the time set for Low
Power mode, the other for the period
after that time.
Note
❒The period for which the machine
remains in Energy Saver mode (i.e.
the period until the mode is turned
off to return to the ready condi-
tion) varies with the effectiveness
of energy saving.
❒If you press the {
Clear Modes/Energy
Saver
} key during the operation,
the current settings will be cleared.
Reference
See “7. Low Pwr. shift Time” “8.
Low Power Timer” of the System
Settings.

Interrupt—Temporarily

Stopping One Job to Copy

Something Else

Use this function if you wish to inter-
rupt a long copy job to make urgently
need copies.
Note
❒The procedure for making inter-
rupt copies depends on which
kind of operation the machine is
currently carrying out.
While a document is being fed
APress the {
Interrupt
} key.
The Interrupt key lights up and
copying stops.
BRemove the originals currently
set for copying, and set your orig-
inals for interrupt copying.
CPress the {
Start
} key.
The machine starts making your
copies.
DWhen you finish making inter-
rupt copies, remove your origi-
nals and copies.
EPress the {
Interrupt
} key again.
The Interrupt key indicator goes
out.
FReturn the originals that were be-
ing copied before.
GPress the {
Start
} key.
The previous copy job settings will
be restored and the machine will
continue copying from where it
left off.