Ricoh 350e, 450e manual Press the Sorter key until the Stack indicator bottom is lit

Sort/Stack/Staple

❒To use the Rotate Stack function,

two paper trays identical in size and different in direction (KL) are required.

Reference

For the maximum tray capacity of the optional finisher, see ⇒ P.46

“Staple”.

APress the {Sorter} key until the Stack indicator (bottom) is lit.

Sort	1-Sided	2-Sided
	1 1	2
Staple	Book	2-Sided
		2
Stac	2-Sided	2-Sided
	2	2	User Tools / Counter
Enhanced	Au o Reduce/		ND2L0101

BTo make punch holes, press the

[Punch] key.

ND2C0101

Limitation

❒The optional 3000-sheet finisher and punch kit are required to use this function (Type 2 only).

❒You cannot make punch holes with Rotate Stack.

Note

❒If you do not wish to make punch holes, go to Step D.

CMake sure that [ON] is selected. Then, press the [OK] key.

2

ND2C0104

DEnter the number of copies with the number keys.

ESet your originals.

When setting a stack of originals in the document feeder

A Set a stack of originals in the

document feeder, then press the {Start} key.

After all the originals are scanned, the copies are deliv- ered to the tray.

Note

❒The last page should be on the bottom.

When setting an original on the exposure glass

ASet an original on the exposure glass, then press the {Start} key.

Note

❒Start with the first page to be copied.

BSet the next originals.

Note

❒Set the original in the same direction as the first one.

45