Adding Toner, 117 | Ricoh 350e, 450e specs

D Adding Toner

DAdding Toner

When D is displayed, it is time to supply toner.

RWARNING:

•Do not incinerate used toner or toner containers. Toner dust might ig- nite when exposed to an open flame. Dispose of used toner containers in accordance with local regulations for plastics.

RCAUTION:

•Keep toner (used or unused) and toner containers out of reach of children.

RCAUTION:

•Our products are engineered to meet high standards of quality and function- ality, and we recommend that you only use the expendable supplies avail- able at an authorized dealer.

Important

❒If you use toner other than that recommended, a fault might occur.

❒When adding toner, do not turn off the power switch. If you do, your settings are cleared.

❒Always add toner after the machine instructs you to add toner.

❒Do not use used toner. This will damage the machine.

Note

❒You can still make about 90 copies after the D appears, but replace the toner early to prevent poor copy quality.

Reference

Regarding toner storage, see ⇒ P.26 “Toner Storage”.

• 1: Open the front cover of the machine.

• 2: Lift the green holder.

3

Toner1

117

Image 143

Ricoh 350e, 450e manual Adding Toner, 117

Contents

350e/450e Overseas Affiliates Page FCC Requirements 355e/455e 355e/455e Operating Instructions Page FCC Requirements Page Savin Corporation Page FCC Requirements Safety During Operation Safety InformationPage Iii Page Page Limitation How to Read this ManualSymbols Preparation Vii Viii What you can do with this Machine Copy ModePage Table of Contents Other Functions Program-Storing your Copy Settings in MemorySort/Stack/Staple Copying from the Bypass Tray If Your Machine does not Operate as You Want 109 Combination Chart 106Accessing the User Tools Copy Features 141 Image Repeat-Repeating an Image Xiii Dos and donts 157 Where to Put your Machine 158Maintaining your Machine 161 176 Xiv Machine Types Guide to Components Bypass tray Operation panelDuplex unit Unit for two-sided copies Front cover Ventilation hole GuideTo copy onto A3, 11 × 17 paper If the end of the sheet is curled Options Place originals On the exposure glass Document feeder Function List Based on Options Place originals On the exposure glass Document feeder This page is intentionally blank Clear Modes/Energy Saver key Operation PanelProgram key User Tools/Counter key Original Type key Mixed Sizes keyAuto Reduce/Enlarge key Clear/Stop key Keys Cursor keysNumber keys Start key Displays items which can be se- lected or specified Panel DisplayDisplays and Key Operations Copy initial display Common keys Display when copyingFunction menu display Sample Display for Erasing the Center/Border Display Panel LayoutPage Main power switch left side of the ma- chine Turning On the PowerPower switches Operation switch right side of the op- eration panel Press the operation switch to make the On indicator go off Turning Off the PowerWhen the Clear Modes/Energy Saver indicator is lit When the machine is set for user codes Changing Modes Inch version Sizes and Weights of Recommended OriginalsOriginals Metric version Sizes detectable by the Auto Paper Select Metric version Sizes Difficult to Detect Exposure glass Document feeder Original Sizes and Scanning Area/Missing Image Area Recommended Paper Sizes and Types Copy Paper Non-recommended Paper Paper Storage Used Toner TonerHandling Toner Toner Storage Set your originals Basic ProcedureMake sure that the machine is in Copy mode Make sure that there are no previ- ous settings remaining Auto Off Auto Reset Lower the platen cover or the doc- ument feeder Setting OriginalsSetting Originals on Exposure Glass Lift the platen cover or the docu Ment feeder Setting a stack of originals in the document feeder Setting Originals Document Feeder Press the Exit key Using Sadf and Thin Paper ModesSadf mode Press the Select key Select Thin Paper with the keys, then press the Select key Thin paper modeSet the next original while the Auto Feed indicator is lit Press the Mixed Original Sizes key Mixed Size Mode Basic Functions Adjusting Copy Image Density Selecting Original Type Setting Select the copy paper Selecting Copy PaperAuto Paper Select Manual Paper Select Make sure that the Auto Auto Paper Select is selected Auto Paper SelectManual Paper Select Rotate Copy Machine Choose Reproduction Ratios Where Original is Original size and direc Set Tion Basic Functions Staple the optional 1000-sheet finish- er required Sort/Stack/StapleSort Stack Sort/Stack/Staple Shift Sort optional finisher required Sort-Sorting into Sets 123, 123Sort Rotate Sort Shift Sort Punch key When setting a stack of originals in the document feederWhen setting an original on the exposure glass Reference Limitation Shift Stack optional finisher re- quired Stack-Stacking Together All Copies of a Page 111, 222Rotate Stack Shift Stack Rotate Stack Make sure that on is selected. Then, press the OK key Press the Sorter key until the Stack indicator bottom is lit Staple Sheet finisher Stapling position and original setting Metric version Inch version 81/2 × Set the next original Select one of four stapling posi- tionsPress the OK key To clear scanned images of the originals When memory reaches 0%To stop scanning To resume scanning Copying from the Bypass Tray Adjust the guides to the copy pa- per size Press the # key Press the Ppr. Size key When copying onto non-standard size copy paperMake sure the k indicator is selected Press the OK key Press the ↓Next key until your desired size is displayed When copying onto standard size copy paperMake sure the k indicator is selected Press the Exit key Press the Ppr. Size key Set your originals, then press the Start key Select the desired size with the keys, then press the OK key Select the paper size, then press the OK key Press the # key. Press the Ppr. Type keySelect OHP or Thick Paper with the keys. Then, press OK key Deleting a Program Program-Storing your Copy Settings in MemoryStoring Your Settings Storing Your Settings No key Deleting a ProgramPress the Delete key Recalling a Program Press the Interrupt key Other FunctionsEnergy Saver Mode-Saving Energy While a document is being fed Set your original Press the Start key User CodesOriginal Beeper Press the Interrupt key. The Interrupt key lights Original → Copy paper Ratio % Size Ratio% Original → Copy paper Size Zoom-Reducing and Enlarging in 1% Steps When using the n or o keyWhen using the number keys Set your originals, then press the Start key Press the Menu key Press the Select key To change the value entered Horizontal % Vertical % ND2C0104 Enter the desired margin width with the number keys Margin Adjustment-Adjusting the MarginPress the Menu key Select Left left margin or Right right margin with the keys Enter the desired margin width the number keys. Then, press Center Erase Center/Border-Erasing the Center and the BorderErase Center Erase Border Center Border Set your originals, then press the Start key Pages→1-sided, 4 pages→2-sided Combine-Combining Originals into One CopyPages→1-sided Pages→1-sided Pages→2-sided One-sided originals are copied onto one side of a sheet Press the ↓Next key until the Combine is displayed Portrait K originals Set the next original, then press the Start key When setting a stack of original in the document feeder Sided → 1-Sided The optional doc- ument feeder is required Book → 1-SidedPages→Magazine Pages→Booklet Select Book → 1-Sidedwith the keys. Then, press the OK key With the optional document feederWithout the optional document feeder Press the ↓Next key until Series Booklet is displayed Select Press ↓Next key Until Landscape How to fold and unfold copies to mark a magazine PortraitPortrait Select the 4pg→Magazine with the keys. Then, press Pages → Booklet-Making Booklet from One-sided 16 Originals Select the 16 pg → Booklet with the keys. Then, press Series / Booklet is displayed Making a booklet Book → 2-sided Duplex-Making Two-Sided CopiesSided → 2-sided Original direction and completed copies Originals and copy direction Set the next original Then Press the Start key Specifying Orientation of Bound Originals Original Copy paper Optional document feeder is re- quired to use this function Cover/Paper Designate-Adding or Inserting Sheets Press the Front key Copy Blank Press the Both key To specify another page number, repeat Step E Press the Ppr. Des. key ND2C0104 OHP Slip Sheet-Copying or Inserting Slip Sheet ND2C0109 Positive/Negative-Copying Complementary Colors Image Repeat Image Repeat-Repeating an ImageImage Twice on One Press the ↓Next key until Image Repeat is displayed Original 51/2 × 81/2K/Copy paperOriginal image is copied repeat Edly Set your original, then press the Start key 81/ L/Copy paper 81/ × 11K100 Press the ↓Next key until Image Recalling The Stored Images Storing the ImagesStoring The Images Deleting The Stored Images Select the type of originals with the keys. Then, press To overwrite images already stored102 Originals File is displayed Deleting the Stored Images103 Start with the first page of your Press the List key Printing a List of the Stored Images104 16pages→2sided with Recalling the Stored Images105 Select the 8pages→1sided or 106 Combination Chart 107 Combination Chart 108 109 If Your Machine does not Operate as You WantMessage 110 Display 111 If you cannot Make Clear Copies 112 Adjust ImageIf you cannot Make Copies as you Want 113 Combine, Series/Booklet 114 Duplex Press the Downkey if it is not lit Loading PaperLoading Paper in the Large Capacity Tray 115 Close the top cover 116Place the paper in the tray along the edge on the left 117 Adding Toner 118 119 120 Clearing Misfeeds 121 122 123 124 When R is lit 125 126 127 Fasten the fences with screws Changing the Paper Size128 129 To adjust the paper sizeAdjust the back fence to the new paper size 130 Adding StaplesSheet Finisher 131 132 133 134 135 Removing Jammed Staples 136 137 138 139 Pull out the punch waste box and remove punch waste Reinstall the punch waste boxRemoving Punch Waste 140 Press the User Tools/Counter key Accessing the User Tools Copy Features141 142 Exiting from User Tools 143 144 User Tools Menu Copy Features 145 146 Settings you can Change with the User ToolsGeneral Features 1/4 147 General Features 2/4 148 General Features 3/4General Features 4/4 149 Adjust Image 1/2 150 151 Adjust Image 2/2 152 Bound Original 153 154 Input/Output 155 Input/Output 156 Shortcut Keys 157 Dos and donts Environments to avoid Where to Put your MachineMachine Environment Optimum environmental conditions 159 Power Connection 160 Access to Machine Maintaining your Machine Cleaning the Platen CoverCleaning the Document Feeder Cleaning the machine 162 Mainframe First copy time Copy paper weightCopy paper size Non-reproduction area Copy paper capacity Power consumptionReproduction ratio Continuous copying count 166 Dimensions W × D × H up to exposure glassSpace for main frame W × D Noise Emission 167 Weight Document Feeder Option 169 Paper Tray Unit OptionAvailable paper size Paper capacity 170 Internal Tray 2 1bin Tray OptionNumber of bins Available paper size Sheet Finisher Option 172 173 174 Punch Kit OptionPaper size 2 holes version Paper size 3 holes version 175 Large Capacity Tray LCT Option 176 Index 177 178