Braun NL Series manual Disengaged Lift-Tite Latch Latch En- gagement Pin Roller

Operation Notes and Details

vent the platform from unfolding from the stowed position in the event of platform drift. Due to the “all-hydraulic” operation of the dual-cylinder NL, hydraulic ÁXLGH[SDQVLRQFRQWUDFWLRQRU seepage may occur. Any of these conditions may result in platform drift (failure to hold the

SODWIRUPWRÁRRUOHYHOVWDQGDUG operation).

When manually operating a lift equipped with Lift-Tite™latches, insert the pump handle in the pump and stroke until the plat- form folds fully (stops). Then,

open the hand pump valve (turn counterclockwise) to unfold the platform. Folding the platform fully ÀUVWZLOOHQVXUHWKDWWKH/LIW7LWH™ latches will disengage properly when the release valve is opened. Manual Operating Instructions are provided on pages 33-37.

platform in the folded or raised position). Platform drift may occur during lift shipment and/or between extended periods of non-lift use.

In the event that the platform does not unfold when the UNFOLD switch is pressed, press the FOLD switch mo- mentarily to disengage the Lift-Tite™latches (platform drift has occurred). Then, press the UNFOLD switch to unfold the

Disengaged

Lift-Tite™

Latch

Latch En- gagement Pin (Roller)

Page 17