Braun NUVL855RM24 manual 34270 29884 31409

WARNING

Decals and Antiskid

Decals

•Read manual before operating lift.

•Load and unload on level surface only.

•Engage vehicle parking brake before operating lift.

•Provide adequate clearance outside of vehicle to accommodate lift.

•Do not operate lift if you suspect lift damage, wear or any abnormal condition.

•Keep operator and bystanders clear of area in which lift operates.

•Handrail latch handles must be down except when stowing and deploying handrails.

Whenever a wheelchair passenger is on the platform, the:

•Handrail belt must be latched.

•Passenger must be positioned fully inside yellow boundaries

•Wheelchair brakes must be locked

•Inner roll stop and outer barrier

must be up.

34270

29884

31409

MANUAL OPERATION

Failure to follow these rules may result in serious bodily injury and/or property damage.

LIFT OPERATING INSTRUCTIONS

OPEN DOOR(S) AND SECURE

12375

2149431937

OUT (TO EXTEND PLATFORM):

1.Pull T-Handle.

2.Turn T-Handle to lock platform in released position.

3.Pull platform out.

4.Turn T-Handle.

5.Push T-Handle in.

6.Turn T-Handle to lock platform in engaged position.

DOWN (TO LOWER PLATFORM):

	VALVE
EN	C
	O
	L
P	S
O	E

TO DEPLOY PLATFORM:

1.	Stand clear and press UP switch until
	platform extends fully. Release switch.
2.	Lift handrail latch handles, deploy
	handrails up to vertical position and
	lower latch handles fully.
3.	Lift outer barrier to vertical position.

Parking Courtesy

LIFT POWER

ON

Using hand pump handle, open
hand pump valve (turn counter-
clockwise). Open 1/2 turn only.	OPEN
DOWN (TO UNFOLD	CLOSE
OUTER BARRIER):

4.	Latch handrail belt.
5.	Press UP switch until platform stops
	(raises to floor level), and inner
	roll stop unfolds to floor level.

TO UNLOAD PASSENGER:

1.Load passenger onto platform and lock wheelchair brakes.

2.Press DOWN switch until the entire platform reaches ground level and outer barrier unfolds fully.

3.Unlatch handrail belt, unlock wheelchair brakes and unload passenger from platform.

Requested

®

"Providing Access to the World"

1-800-THE LIFT www.braunlift.com

12375

OFF 21494

1.Remove hairpin cotter from detent pin.

2.Remove detent pin.

3.Unfold (rotate) barrier down.

UP (TO FOLD

OUTER BARRIER):

1.Fold (rotate) barrier up.

2.Insert detent pin.

3.Insert hairpin cotter in detent pin.

	Hairpin
Actuator	Cotter
PLATFORM
BARRIER
OUTER

Detent

Pin

TO LOAD PASSENGER:

1.Load passenger onto platform, lock wheelchair brakes and latch handrail belt.

2.Press UP switch to fold outer barrier up, raise platform to floor level, and unfold inner roll stop to floor level.

3.Unlock wheelchair brakes and unload passenger from platform.

WARNING

33602

HANDRAIL INSTRUCTIONS

UP (TO RAISE PLATFORM):

Using hand pump handle:

1.Close hand pump valve (turn clockwise).

2.Insert handle in pump and stroke.

Note: Close valve before operating electric pump.

EN P O

C

L

O SE

TO STOW PLATFORM:

1.Latch handrail belt.

2.Press STOW switch until platform stops at stow level.

3.Unlatch handrail belt.

4.Fold outer barrier down to platform (horizontal) position.

5.Lift handrail latch handles, stow handrails down to platform (horizontal) position and lower latch handles fully.

6.Press STOW switch until platform stops (retracts fully).

CLOSE DOOR(S)

DOT — Public Use Lift

Before stowing lift:

•Lower outer barrier down to platform.

•Lower handrails down to platform.

•Lower latch handles down to platform.

Failure to follow these precautions may result in serious bodily injury

and/or property damage.

Before

stowing

lift:

(Steps 1-3)

After

deploying

lift:

(Reverse

procedures)

1. Fold outer barrier down.

JKA

2. a. Lift latch handle.

b. Deploy / Stow handrail. c. Lower latch handle.

Latch Handle Detail	JKA
	b.

a.

c.

3.a. Lift latch handle.

b.Deploy / Stow handrail.

c.Lower latch handle.

a.

c. b.

JKA

Latch Handle Detail

IN (TO STOW PLATFORM):

1.Raise or lower platform to stow level (follow UP or DOWN procedures).

2.Pull T-Handle.

3.Turn T-Handle to lock platform in released position.

4.Push platform in.

5.Turn T-Handle.

6.Push T-Handle in.

7.Turn T-Handle to lock platform in engaged position.

Read operator's manual for further details.

DOT — Public Use Lift

34270

33602

31409

Page 38