Braun NUVL855RM24 manual DE Door-Ease

Maintenance and Lubrication

All listed inspection, lubrication and maintenance procedures should be repeated at “750 cycle” intervals following the scheduled “4500 Cycles” maintenance. These intervals are a general guideline for scheduling maintenance procedures and will vary according to lift use and conditions. Lifts exposed to severe conditions (weather, environment, contamination, heavy usage, etc.) may require inspection and maintenance proce- dures to be performed more often than specified.

Maintenance Indicator: The Lift Ready green LED, mounted on the hand-held pendant storage bracket, will change color to yellow after every 750 cycles. The yellow LED will not affect the functions of the lift, but is a reminder to complete

necessary maintenance and lubrication proce- dures. Once the lift has been serviced, press the CYCLE button (located below LCD display on the control board) until the Lift Ready LED changes back to green. The CYCLE button also clears the lift cycle count (since last service) but not the lifetime cycle count.

Discontinue lift use immediately if maintenance and lubrication procedures are not properly per- formed, or if there is any sign of wear, damage or improper operation. Contact your sales repre- sentative or call The Braun Corporation at 1-800- THE LIFT®. One of our national Product Support representatives will direct you to an authorized service technician who will inspect your lift.

See the Maintenance/Lubrication Schedule for recommended applications per number of cycles.

		Specified (recommended)	Available	Braun
Lubricant	Type	Lubricant	Amount	Part No.
LO - Light Oil	Light Penetrating Oil	LPS2, General Purpose	11 oz.	15807
	(30 weight or equivalent)	Penetrating Oil	Aerosol Can
DE - Door-Ease	Stainless Stick	Door-Ease	1.68 oz.	15806
	Style (tube)	Stick (tube)
SG - Synthetic Grease	Synthetic Grease	Mobiltemp SHC32	12.5 oz.	28598
	(Multipurpose)		Tube

Page 41