
DAILY PREVENTIVE MAINTENANCE SCHED-
Vehicle Number: |
| Date: |
Inspector:
Pre-Trip Inspection:
Before each scheduled day of lift service, operate ramp minimum one complete cycle and inspect each of the following :
![]()
Do the vehicle interlock(s) function as intended?
![]()
Does the ramp deploy when the ramp interlock is activated as intended?
![]()
Does the lift control switch function properly?
![]()
Does the ramp cargo door light (if equipped) function as intended?
![]()
Do the lift cargo door securement devices function as intended (if equipped)?
![]()
Does the ramp safely clear the cargo door as the ramp is deployed and stowed?
'RHVWKHUDPSRSHUDWHVPRRWKO\QRMHUNLQJRUDEQRUPDOPRYHPHQW"
![]()
Does the ramp operate at normal speed?
![]()
Is the lift power source adequate?
![]()
Do the drive arms clear the ramp and housing?
![]()
Is ramp operation quiet (no rattles, abnormal sounds, etc.)?
![]()
Are the
![]()
Is the ramp antiskid in place, worn or damaged?
![]()
Can you visually detect any ramp wear, damage, misalignment, hydraulic leaks, loose bolts, broken welds or any abnormal conditions?
Post-Trip Inspection:
Operate ramp minimum one complete cycle and check each of the above daily
![]()
Clean ramp surfaces where wheelchairs travel
![]()
Clean and lubricate key locations based on ramp usage frequency and climate conditions (outlined by your transit agency). Lubrication procedures should be performed by transit agency maintenance personnel.
Page 431