Bretford LAP30EBA manual Step

Step 2

With both doors open, remove the 3 bottom interior shelves by carefully pushing upward (to release shelf from mounting tabs) shown in Detail 'B', then carefully sliding out. Set each shelf aside.

E-Unit bracket assembly

bottom flange- bracket assembly

Step 3

Remove 2 screws from bottom flange (securing bracket to bottom of cart) and remove bracket assembly. The E- Unit bracket assembly shown above, will need to be removed (with a philips screwdriver) to allow the E-Unit to swing back. This will allow the timer cord plug to pass between the E-Unit and rear panel.