Operating your Breville Kinetix® Aero
5.Plug the power cord into a 230/240V power outlet and switch on.
6.Ensure the blender is in the OFF position.
NOTE
Do not fill the blender jug above the MAX line. When the blender jug is filled at or near the MAX line place one hand on the blender lid
to avoid displacement of the lid during operation.
Select the required speed (1 to 12) by turning the dial to the corresponding speed.
Operate the blender only for the appropriate amount of time required – do not over blend.
7.PULSE/ICE CRUSH button - For ingredients that require short bursts of power, like crushing ice. The pulse feature can be used while the blender is in the STANDBY position. When pressed, the pulse button will illuminate and will continue to operate until it is released.
NOTE
The maximum amount of ice cubes the blender can blend at any one time is 1 standard ice tray or 250g.
NOTE
Use the PULSE button when the food that is being processed is too thick or coarse to circulate within the blender jug.
8.At the end of use, always ensure the blender is turned to the OFF position. Then switch the appliance off at the power outlet and unplug the cord. Ensure the motor and blades have completely stopped before attempting to move the appliance, or when the blender is not in use and before disassembling, cleaning and storing.
NOTE
During the blending process, ingredients may stick to the side of the blender jug. To push the food back onto the blades, turn the blender to the OFF position, switch off at the power outlet and remove the power cord.
Remove the lid and use a plastic spatula to scrape down the sides of the jug. Replace the lid before recommencing blending.
NOTE
If any moisture or liquid appears on top of the motor base during blending, turn the blender to the OFF position, switch off at the power outlet and remove the power plug. Remove the blender jug. Wipe the motor base immediately with a dry cloth or paper towel to absorb the liquid. Check the blade assembly is correctly assembled.
12
