Operating your Breville Wizz Electronic continued
Step 4.
Plug the power cord into a 230/240v power outlet and switch on. The red light beside the Stop button will illuminate and remain illuminated whilst the appliance is switched on at the power outlet.
4
Step 5.
Select the required speed function by pressing in the corresponding speed button for example Low Speed 1 up to High Speed 5. A red light will illuminate beside the speed button as it is selected. Speed can be changed at any time during the blending process. Press Stop button, located at the front of the motor base, to finish blending.
Step 6.
For ingredients that require short bursts of power, use the Pulse function. Press the Pulse button and the red light beside it will flash then select a speed button and press in short bursts until blending is complete. When a speed button is selected, the red lights beside the Pulse and Speed buttons will remain illuminated whilst the speed button is pressed in.
Step 7.
The Ice Crush button has the highest speed and operates independent of the Pulse function. Press the Ice Crush button in short bursts to operate.
Step 8.
At the end of use, switch off at the power outlet and remove the power cord.
Important: to crush ice
Place 1 cup of frozen ice cubes into the Blender Jug. Replace lid and push the button in to PULSE for short bursts until a snowy textured ice is achieved. This will take approximately 15 seconds.
During the blending process, ingredients may stick to the sides of the either the Blender jug or Food Processor bowl. To push the food back onto the blades, press the Stop button and switch off at the power outlet. Remove the lid and use a plastic spatula to scrape down the sides of the jug. Replace the lid before recommending blending or processing.
Note
If any moisture of liquid appears on top of the motor base, press the Stop button, switch off at the power outlet and remove the power plug. Remove the blender jug or food processing bowl. Wipe the motor base immediately with paper towelling and check the blender jug or food processing bowl are correctly assembled.
Note
Assembling and Attaching the Food Processor Bowl with the chopping blade
Step 1.
Place the motor base on a flat, dry surface such as bench top. Ensure that the motor base is switched ‘OFF’ at the power outlet and the power cord is unplugged.
1
Step 2.
Insert the food processor bowl support onto the motor base. Place the food processor bowl onto the spindle of the food processor bowl support and
turn
2
Step 3.
Attach the processing bowl lid by positioning the feed chute opposite to the handle then turning the lid anticlockwise until it locks into position.
3
Step 4.
To commence processing ensure the food pusher is positioning in the feed chute. Plug the power cord into a 230/240V power outlet and switch on.
Select a function by pressing in the corresponding function button on the control panel and its light will illuminate.
4
NEVER PLACE ANYTHING OTHER THAN FOOD AND LIQUIDS IN THE WIZZ ELECTRONIC WHILST THE MOTOR IS RUNNING.
DO NOT OPERATE THE WIZZ ELECTRONIC CONTINUOUSLY ON HEAVY LOADS FOR MORE THAN ONE MINUTE.
8
9
