Operating your Breville Wizz Electronic continued
Care and cleaning
4
Step 5.
Remove the food pusher, insert the food to be sliced or shredded and push down with the food pusher to guide the food through the chute. Repeat with remaining food. Do not overfill the food processor bowl.
Step 6.
To switch off, press the same button again or press the Stop button in the middle of the speed control panel.
6
Step 7.
At the end of use, switch off at the power outlet and remove the power cord.
•Always ensure the Breville Wizz Electronic is in the off position, by pressing Stop on the speed/function control panel and switching off at the power outlet and unplugging the power cord.
•To remove the blender jug from the motor base, grasp the handle and lift upwards. Use the Blender Blade Assembly Tool to remove the Blender Blade Assembly. The white plastic surround on the base of the blender jug cannot be removed.
•To remove the food processor bowl from the food processor support on the motor base, turn bowl clockwise and lift upwards. Follow instructions in ‘Assembly and Operation of your Breville Wizz Electronic’ on page 9.
Cleaning the Motor Base, Food Processor
Bowl Support and Blender Blade
Assembly Tool
•Wipe the motor base, food processor bowl support and blender blade assembly tool with a soft, damp cloth then dry thoroughly.
•Wipe any excess food particles from the power cord.
Cleaning the Food Processor Bowl, Lid, Blade, Disc, Disc Shaft and Food Pusher, Blender Jug, Blade Assembly, Inner Lid and Lid
•Wash all parts in warm soapy water with a soft cloth. Use a kitchen bottle brush to dislodge foods from the disc shaft, processing blade and disc. Rinse and dry thoroughly.
Note: do not use abrasive souring pads or cleaners when cleaning the parts or motor base as they may scratch the surface.
Note
Removing stubborn or strong food stains and odours
Strong smelling foods such as garlic, fish and some vegetables such as carrots may leave an odour or stain on the processor bowl, lid and disc holder, blender jug and lid. To remove, soak processing bowl, lid and disc holder or blender jug and lid for 5 minutes in 100mls bleach dissolved in 2 litres water. Then wash with a mild detergent and warm water, rinse well and dry thoroughly.
Storage
Store Breville Wizz Electronic on the kitchen bench top. The slicing/shredding disc can be stored in the food processor bowl, with the lid and food pusher in position. The blender jug, blade assembly and lids can be assembled and stored next to it. Place the food processor blade and blender blade assembly tool in the blender jug for safe storage.
BE CAREFUL WHEN HANDLING THE CUTTING BLADES AS THEY ARE SHARP. MISHANDLING OF THE BLADES MAY CAUSE INJURY.
12
THE CHOPPING BLADE AND DISCS ARE EXTREMELY SHARP!! USE CAUTION WHEN HANDLING AND STORING THESE PARTS. ALWAYS STORE THE CHOPPING BLADE WITH THE PROTECTIVE COVER PROVIDED
13
