CARE & CLEANING

g)Empty drip tray and reinsert into position. Use caution as the drip tray may be hot due to the water and steam from the boilers.

h)Press SELECT dial to proceed to next step.

Step 5 – Fill Boilers

During Step 5 procedure, the grind LCD will display '05'.

a)5 minute timer will begin. During this time, water may flow through the group head. Wait for countdown timer to reach 0:00. This allows any remaining solution to be removed from system.

Step 6 – Flush Boilers

During Step 6 procedure, the grind LCD will display '06' and the main LCD will display 'PUSH'.

a)Empty and rinse water tank. Assemble new water filter into tank.

b)Fill water tank with cold water to MAX line. Replace and lock water tank back into position at the back of the machine.

c)Ensure drip tray is empty and fully inserted into position.

d)Place a cloth over the drip tray to stop steam escaping.

e)Use a flat-head screwdriver to rotate the right screw counter-clockwise until the valve is fully open. As the valve opens, steam may be released.

CAUTION

HOT WATER & STEAM

f)Next, repeat the above process on the left screw. As the valve is opened, water may begin flowing into the drip tray.

g)Allow valves to remain open until no more water or steam escapes.

h)Close both valves by rotating screws clock-wise until seated. Do not overtighten screws to avoid damaging the valves. Replace the grey silicone cover over the valves.

i)Empty drip tray and reinsert into position. Use caution as the drip tray may be hot due to the water and steam from the boilers.

j)Press SELECT dial to complete descale procedure. Machine will heat up and is ready to use once operating temperature (STANDBY mode) is reached.

CARE & CLEANING

USING THE ALLEN KEY

Over time, the silicone seal surrounding the shower screen will need to be replaced to

ensure optimum brewing performance.

1.Press the POWER button to turn the machine off and unplug the cord from the power outlet.

2.Carefully remove the rear water tank and drip tray, taking particular care if they are full.

3.Using a skewer or similar, clean

the center of the screw of any residual coffee.

4.Insert the shorter end of the Allen Key into the center of the screw. Turn counter-clockwise to loosen the screw.

Clean center of screw before inserting Allen Key

5.Once loosened, carefully remove and retain the screw, stainless steel shower screen and black dispersion plate. Make note of the side of the shower screen and dispersion plate that are facing downwards. This will make re-assembly easier. Wash the shower screen and dispersion plate in warm soapy water, then dry thoroughly.

6.Remove the silicone seal with your fingers or a pair of long-nose pliers. Insert the new seal, flat side first, so the ribbed side is facing you.

7.Re-insert the dispersion plate, then the shower screen, then the screw. With your fingers, turn the screw clockwise for 2–3 revolutions then insert the Allen Key to tighten until the screw is flush with the shower screen. Do not overtighten screw.

8.Re-insert the drip tray and rear water tank.

Contact Breville Consumer Support or visit www.breville.com for replacement silicone seals or for advice.

40

 

41

 

 

 

Page 20 Page 22
Page 21
Image 21
Breville The Oracle, BES980XL manual Using the Allen KEY, Fill Boilers, Flush Boilers
Page 20 Page 22

The Oracle, BES980XL specifications

The Breville BES980XL, known as The Oracle, is a remarkable espresso machine that combines cutting-edge technology with user-friendly features, making it an outstanding choice for both novice coffee enthusiasts and seasoned baristas. This dual boiler machine offers precise temperature control and pressure management, allowing users to brew café-quality espresso at home.

One of the standout features of The Oracle is its dual boiler system. This design separates the brewing and steaming processes, enabling users to extract espresso and steam milk simultaneously. With independent boilers for both tasks, users can achieve perfect microfoam for lattes and cappuccinos, while also ensuring that espresso is brewed at an optimal temperature for maximum flavor extraction.

The Oracle is equipped with a unique automatic grinding and tamping system. With its integrated conical burr grinder, this machine allows users to grind coffee beans fresh for each shot. This feature is critical, as freshly ground coffee significantly enhances the flavor and aroma of the espresso. Once ground, the machine automatically tamps the coffee puck to the ideal pressure, providing consistency with minimal effort.

Another significant aspect of The Oracle is its advanced PID temperature control. This technology ensures that the brew temperature is precise and stable during extraction, which is key to producing high-quality espresso shots. The temperature is adjustable, allowing users to fine-tune their brew to their preferred taste profile.

The Oracle also prioritizes customization, offering a range of settings to cater to individual preferences. Users can adjust grind size, shot volume, and milk texture to create unique beverages tailored to their liking. The one-touch operation for various coffee drinks makes it convenient to prepare everything from espressos to cappuccinos with ease.

Furthermore, the machine features a stainless steel construction, ensuring durability and longevity. Its sleek design and intuitive interface, complete with an LCD display, provide a modern touch that appeals to aesthetics while enhancing usability.

In summary, the Breville BES980XL, The Oracle, stands out as an exceptional home espresso machine, equipped with an array of sophisticated features such as a dual boiler system, automatic grinding and tamping, PID temperature control, and customizable settings. This combination of technology and user-friendliness makes it a favorite among coffee lovers seeking to elevate their espresso experience.
Top Page Image Contents