Operating your Breville Ikon Grill continued
8. Usethe handle to close the top plate. The top
platehas a floa ting hinge system that is
designedto pressdown evenlyon thefood. The
GrillingHeight Control on the right hand side of
thetop plate is used to adjust for the thickness
ofthe food. The top plate must be fully lowered
toachieve grill marks onto the food.
9. Whenthe selected ingredients are grilled, use the
handleto open the top lid. Remove the food
usinga plastic spatula.
Touse as a sandwich press
1. Insertthe plug into a 230/240v power outlet and
switchthe po wer on.The red power ‘On’ light
willilluminate.
2. Ensurethe RemovableDrip Tray is correctly
insertedand positioned back into the appliance.
3. Ensurethe top and bottom plates grill pla tes are
securelylocked into position.
4. Ensurethe top plate is in the closed position for
moreefficient preheating.
5. Turnthe Base Plate Tilt Dial to the Flat position.
6. Turnthe variable heat control dial to the
‘Sandwich’position.
7. Allowthe Ikon Grill to prehea t until the green
‘READY’light illuminates.
8. Duringthis time,prepare the sandwichand place
itonto the base cooking plate. Always place
sandwichestowards the rear of the bottom
cookingplate.
9. Closethe top cooking plate which has a floa ting
hingethat is designed to evenly press do wn on
thesandwich. The top plate must be fully
loweredto cooksandwiches. The GrillingHeight
Controlon the right hand side of the top plate is
usedto adjust for the thickness of the sandwich.
10. Toasting should take approximately 5-8 minutes.
Exacttoasting time will be a matter of
preference.It will also depend on the type of
breadand filling used.
Thegreen ‘READY’ light will cycle on and off
duringthe toasting process indicating tha t the
correcttemperature is being maintained.
Note
11. When the sandwich is cooked, use the handle to
openthe top plate. Remove the sandwich using a
plasticspatula. Never use metal tongs or a knife
asthese can cause damage to the non-stick
coatingof the cooking pla tes.
Alwaysallo w the Ikon Grill to preheat until the
green‘READY’ light illuminates.
Note
8