Breville BKC600XL manual Omplete Brew, Wing

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 11

™continued

e.

AD’. Open and etely. The EW’.

omplete

®brew

2).

ater Filter cess (page the ated.

BREW’. and the for up to

conds, nd the ccidental e, open owering

Note

te. The oved to gs.

wing

6.Place the K-Cup®in the K-Cup®Holder (located

in the Brewing Chamber). Do not remove the foil lid or puncture the K-Cup®.

There are two sharp needles that puncture the K-Cup®. One on the underside of the Brewing Chamber Head and the other in the base of the K-Cup®Holder. To avoid risk of injury, do not put your fingers in the Brewing Chamber or K-Cup®Holder.

Note

7.Lower the Safety Locking Arm to close the Brewing Chamber Head over the K-Cup®Holder.

When closed completely, the LCD screen will

indicate ‘READY TO BREW’. The and buttons will illuminate and the ‘BREW’ button will illuminate and flash for up to 60 seconds

a)The LCD screen will indicate the default brew

size (7.25 oz.). To choose a different size,

press the button to go up in size or the

button to go down in size.

Select from a stronger small cup (5.25 oz. serving), a small mug (7.25 oz. serving), a large mug (9.25 oz. serving) or a travel mug (11.25 oz. serving).

The small mug (7.25 oz. serving) is the default brew size. To program your favorite brew size, refer to Setting the ‘BREW SIZE’ feature (page 20).

Note

b)Once the brew size is selected, press the ‘BREW’

Button. The ‘BREW’ button will stop flashing, the

and buttons will no longer be lit. The LCD screen will indicate ‘BREWING’ and the selected brew size.

If the ‘BREW’ button is not pressed in 60 seconds, the LCD screen will indicate ‘OPEN HEAD’ and the ‘BREW’ button will be disabled to prevent accidental activation. To re-activate the brew sequence, open the Brewing Chamber Head by raising and lowering the Safety Locking Arm completely.

Note

11