Usage Tips

•For most effective cleaning, keep spray tip from 8 to 24 inches away from cleaning surface.

•If you get spray tip too close, especially using a high pressure spray tip, you may damage surface being cleaned.

•DO NOT get closer than 6 inches when cleaning tires.

How to Use the Turbo Nozzle

The turbo nozzle spins a 0° nozzle stream in a circular pattern, providing an intense wide-spray pattern for scouring large surface areas fast and efficiently.

A turbo nozzle can easily cut through heavy oil and grease stains on concrete, brick and plastic and strip paint from various surfaces. DO NOT use the turbo nozzle on delicate materials, especially wood. Always start the turbo nozzle at a distance, gradually getting closer to the surface until you get the cleaning force you want. Always keep the turbo nozzle in a constant motion. NEVER dwell on a single spot. Pass over stubborn stains repeatedly until they are gone using even strokes.

WARNING

The high pressure stream of water that this equipment produces can cut through skin and its underlying tissues, leading to serious injury and possible amputation.

The turbo nozzle produces an extremely high pressure spray which is capable of removing paint and cutting holes through surfaces if held too close.

•Always make sure the surface you will clean will not be damaged by the high pressure spray by testing in a hidden area.

To attach the turbo nozzle to the nozzle extension:

1.Engage trigger lock on spray gun trigger.

2.Pull back collar on quick–connect and pull current nozzle off. Store nozzles in holder provided on the accessory tray.

3.Pull back on collar, insert turbo nozzle and release collar. Tug on turbo nozzle to make sure it is securely in place.

4.For most effective cleaning, keep turbo nozzle from 8 to 24 inches away from cleaning surface. If you get turbo nozzle too close, you may damage cleaning surface.

NOTE: Detergent cannot be applied with the turbo nozzle.

Cleaning and Applying Detergent

CAUTION

Chemicals can cause bodily injury, and/or property damage.

•NEVER use caustic liquid with pressure washer.

•Use ONLY pressure washer safe detergents/soaps. Follow all manufacturers instructions.

To apply detergent, follow these steps:

1.Engage trigger lock.

2.Pull back on collar, insert black detergent nozzle and release collar. Tug on nozzle to make sure it is securely in place.

3.Prepare detergent solution as required by job.

4.Place small filter end of detergent siphoning tube into detergent container.

NOTE: Make sure the filter is fully submerged in detergent while applying detergent.

NOTICE

Contact with the hot muffler can damage detergent siphoning tube.

•When inserting filter into a detergent solution bottle, route tube so as to keep it from inadvertently contacting hot muffler.

5.Make sure garden hose is connected to water inlet. Check that high pressure hose is connected to spray gun and pump. Turn on water.

NOTICE

You must attach all hoses before you start the engine.

•Starting the engine without all the hoses connected and without the water turned ON will damage the pump.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

6.Engage trigger lock on spray gun and start engine following instructions How to Start Your Pressure Washer.

7.Apply detergent to a dry surface, starting at lower portion of area to be washed and work upward, using long, even, overlapping strokes.

8.Turn the regulator knob (A) on the black detergent nozzle to adjust detergent flow. Turn the knob toward “On” for more detergent or toward “Off” for less detergent.

A

15