OPERATION

USING THE GENERATOR

System Ground

The generator has a system ground that connects the generator frame components to the ground terminals on the AC output receptacles.The system ground is connected to the AC neutral wire (the neutral is bonded to the generator frame).

Special Requirements

There may be Federal or State Occupational Safety and Health Administration (OSHA) regulations, local codes, or ordinances that apply to the intended use of the generator. Please consult a qualified electrician, electrical inspector, or the local agency having jurisdiction.

•In some areas, generators are required to be registered with local utility companies.

•If the generator is used at a construction site, there may be additional regulations which must be observed.

Connecting to a Building’s Electrical System

Connections for standby power to a building’s electrical system must be made by a qualified electrician.The connection must isolate the generator power from utility power, and must comply with all applicable laws and electrical codes.

WARNING

Generator produces powerful voltage.

Failure to isolate generator from power utility can result in death or injury to electric utility workers due to backfeed of electrical energy.

•When using generator for backup power, notify utility company. Use approved transfer equipment to isolate generator from electric utility.

•Use a ground fault circuit interrupter (GFCI) in any damp or highly conductive area, such as metal decking or steel work.

•DO NOT touch bare wires or receptacles.

•DO NOT use generator with electrical cords which are worn, frayed, bare or otherwise damaged.

•DO NOT operate generator in the rain.

•DO NOT handle generator or electrical cords while standing in water, while barefoot, or while hands or feet are wet.

•DO NOT allow unqualified persons or children to operate or service generator.

Generator Location

Generator Clearance

WARNING

Running generator gives off carbon monoxide, an odorless, colorless, poison gas.

Breathing carbon monoxide can cause nausea, fainting or death.

•Operate generator ONLY outdoors.

•Keep exhaust gas from entering a confined area through windows, doors, ventilation intakes or other openings.

•DO NOT operate generator inside any building or enclosure, including the generator compartment of a recreational vehicle (RV).

The generator must be at least 5 ft. (1.5 m) from structures having combustible walls and/or other combustible materials. Leave at least 3 ft. (1 m) all around generator including overhead, for adequate cooling, maintenance and servicing.

Place generator in a well ventilated area, which will allow for removal of deadly exhaust gas. DO NOT place generator where exhaust gas could accumulate and enter inside or be drawn into a potentially occupied building. Ensure exhaust gas is kept away from any windows, doors, ventilation intakes or other openings that can allow exhaust gas to collect in a confined area (Figure 3). Prevailing winds and air currents should be taken into consideration when positioning generator.

Figure 3 — Generator Clearance

Typical Generator Shown

Exhaust Port

8

Page 7 Page 9
Page 8
Image 8
Briggs & Stratton 30238 Using the Generator, System Ground, Connecting to a Building’s Electrical System, Exhaust Port
Page 7 Page 9

30238 specifications

The Briggs & Stratton 30238 is a powerful and reliable generator, widely recognized for its exceptional performance and durable construction. Designed for residential and light commercial use, this generator is equipped with features that make it an ideal choice for both backup power during outages and for powering tools and appliances on job sites.

One of the standout features of the Briggs & Stratton 30238 is its robust engine. Powered by a 7,500-watt starting and 6,000-watt running capability, it is capable of handling heavy loads with ease. The generator is equipped with a strong OHV (Overhead Valve) engine that offers improved fuel efficiency and lower emissions, ensuring it runs cleanly and efficiently.

Another key characteristic of the 30238 is its large fuel tank. With a capacity of 5 gallons, this generator provides an impressive runtime of up to 9 hours at 50% load. This means users can rely on the 30238 for extended periods without frequent refueling, a crucial feature during extended power outages or when working on-site.

The Briggs & Stratton 30238 also boasts a user-friendly control panel with multiple outlets for convenience. It includes two 120V 20A household outlets, one 120V 30A locking outlet, and even a 12V DC outlet, allowing users to power various appliances simultaneously. This versatility makes it easy to connect everything from refrigerators to power tools, ensuring you have what you need when you need it.

In terms of safety and ease of use, the generator is equipped with a low-oil shutdown feature that automatically turns off the engine when the oil level becomes too low. This helps prevent engine damage and prolongs the life of the generator. Additionally, the unit features a recoil start for easy operation, making it accessible to users of all experience levels.

Durability is another hallmark of the Briggs & Stratton 30238. It features a sturdy steel frame designed to withstand tough conditions, making it ideal for use in various environments. Coupled with a compact design, the generator is also relatively easy to transport, facilitating mobility when it is needed the most.

In summary, the Briggs & Stratton 30238 is a powerful and reliable generator that combines performance, efficiency, and user-friendly features. With its strong engine, extended runtime, versatile outlets, safety features, and durable construction, it stands out as an excellent choice for anyone in need of reliable backup power or a dependable portable generator for various tasks.
Top Page Image Contents