Features & Controls

Hour Meter

The hour meter measures the number of hours the key has been in the RUN position.

Note: The hour meter will register the passage of time when the key is in the RUN position, even if the engine is not running. The hour meter has a self contained power source so the total hours are always visible.

PTO Switch

The PTO (Power Take-Off) switch engages and disengages attachments that use the PTO. To engage the PTO, pull UP on the switch. Push DOWN to disengage. Note that the operator must be seated firmly in the rider seat for the PTO to function.

Transmission Oil Fill

Fuel Tank

Fuel Level Gauge

To remove the cap, turn counterclockwise. The fuel gauge is mounted in the fuel tank and indicates the amount of fuel in the tank.

Mower Height of Cut Adjustment & Attachment Lift Control Lever

To adjust cutting height, pull the large lever back fully to lock the control in the attachment raised transport position. Position the cutting height selector pin on the appropriate hole to achieve the desired cutting height. Pull back on the small lift latch lever and large lever simultaneously, and lower the mower into cutting position.

 

 

 

 

 

 

For attachment transport lift, pull the large lift lever

 

 

 

Reproduction

Transmission oil is added through the transmission oil

back fully to lock the co

trol in the attachment raised

 

 

 

 

 

for

 

 

reservoirs. It also serves as extra holding capacity for

t ansport position.

 

oil as the transmissions heat up and the oil expands.

 

 

 

 

See CHECK TRANSMISSION OIL LEVEL for oil level

 

 

Park ng Brake

 

check and fill procedures.

 

 

 

 

 

 

 

 

Transmission Release Levers

 

 

DISENGAGE

Releases the parking brake.

The transmission release levers deactivate he

 

 

 

ENGAGE

Locks the parking brake.

transmissions so that the unit can be pushed by hand.

 

 

 

 

See PUSHING THE UNIT BY HA D for

perati nal

P ll the parking brake lever back to engage the

information.

 

 

 

parking brake. Move the lever fully forward to

 

 

Seat Adjustment Lever Not

 

 

 

 

disengage the parking brake. NOTE: To start the unit

 

 

 

 

 

 

the parking brake must be engaged.

 

 

 

The seat can be adjusted forward and backwa d.

 

 

 

 

 

Move the adjustment lever towards the l

ft, slide the

 

 

 

 

seat to the desired position, and release the l v r.

13