|
|
|
|
|
|
|
| Operation | |
E |
| C |
|
|
|
|
|
| |
|
|
|
|
|
| J |
| ||
M |
|
|
|
|
| D | F | ||
|
|
|
|
|
| ||||
H |
|
|
|
|
|
|
| H | |
| I |
|
|
|
|
|
|
| |
|
| K |
|
|
|
| L |
| |
G A |
|
|
|
|
|
|
| B | |
|
|
|
|
|
|
|
| ||
| Figure 12. Mower Installation & Removal |
|
| G. Handle |
|
| ||||
| A. Left Front Rod Lock |
|
|
|
| H. Front Hanger Rod Ends | ||||
| B. Right Front Rod Lock |
|
|
|
| I. | Left Leveling Link |
| ||
| C. Left Leveling Link Hair Pin |
|
|
|
| J. Right Leveling Link |
| |||
| D. Right Leveling Link Hair Pin |
|
|
|
| K. Left Rear Lift Rod |
| |||
| E. Left Rear Rod Lock |
|
|
|
| L. Right Rear Lift Rod |
| |||
| F. Right Rear Rod Lock |
|
|
|
| M. Roller Bar Connecting Rod (select models) | ||||
| Reproduction |
| |||||||
Installation (44” & 50” Mower Decks) |
|
| Reinstalling the Mower Deck Belt | ||||||
| Installing the Mower Deck to the Unit |
|
|
| 1. | Reinstall the belt a d make sure that it is properly | ||||
1. Disengage the PTO, engage the parking brake, |
|
| seated | n all pulleys. |
| ||||
turn off the ignition, remove the key, and wait | or all |
| 44” & 50” M wer Decks: | ||||||
moving parts to stop. |
|
|
|
| a. Install | he belt as shown in Figure 10. | |||
2. Remove the cutting height pin and l | wer he |
| forb. Release tension from the tensioning idler pulley | ||||||
attachment lift to its lowest position. |
|
|
|
| sing the belt tension lever (D) and make sure the | ||||
3. Pivot the front wheels out of the way and slide the |
| belt is seated properly in all pulleys. | |||||||
mower deck under the unit. |
|
|
|
|
| 46” Mower Decks: |
| ||
4. Install the leveling links (I & J, Figure 12) and hair |
| a. Install the belt on the arbor pulleys (A, Figure 10), | |||||||
pins (C & D). | Not |
| |||||||
|
| ||||||||
5. Lift the rear of the mower deck and install the | ear | b. Rotate the belt tension release lever (D) to relieve | |||||||
lift rods (K & L) and secure with the r | ar rod locks | ||||||||
| the tension on the belt and install the belt on the | ||||||||
(E & F). |
|
|
|
|
| ||||
|
|
|
|
| PTO pulley (C) |
| |||
|
|
|
|
|
|
| |||
| 6. 44” & 50” Simplicity Models Only: Install the |
| c. Carefully release the tension on the on the belt | |||||||
roller bar connecting rod (M) and the hair pin. |
|
| |||||||
|
|
| tension release lever and make sure the belt is | ||||||
|
|
|
|
|
| ||||
7. Lift the front of the deck using a 2 x 4 as a lever, |
|
| seated properly in all pulleys. | ||||||
pull the handle (G) to align the front hanger rod |
|
| 54” Mower Decks: |
| |||||
|
|
|
|
|
|
| |||
ends (H) with the slots and secure with the front
rod locks (A & B). | a. Install the belt on the PTO pulley (C, Figure 10), | |
the arbor pulleys (A), and all | ||
| ||
| except for the stationary idler pulley (B, Figure 11). | |
| b. Carefully rotate the breaker bar COUNTER- | |
| CLOCKWISE and install the belt on the stationary | |
| idler pulley. | |
| c. Carefully release the tension on the breaker bar | |
| and make sure the belt is seated properly in all | |
| pulleys. |
19