![](/images/new-backgrounds/1171281/17128141x1.webp)
Do not start the motor when you are standing in front of the discharge duct.
Keep your fingers and feet away from the cutting tool!
Never lift or carry a machine with the motor running.
Each time you have to work on the machine or leave it or top it up, always switch off the motor.
If you strike an obstacle when working, please disable the machine. Unplug from the mains. Remove the obstacle, check the equipment for any damage and have it repaired if necessary.
If the equipment begins to vibrate strongly, unplug from the mains and ascertain the cause.
Taking
Aa Break
Never leave the equipment unat- tended. If you stop work, unplug the equipment from the mains and store the equipment in a safe place.
If you stop work to go to a dif- ferent work area, it is essential to turn the equipment off and unplug from the mains.
Beware of Environmental AInfluences
Never use the equipment in the rain or in damp, wet conditions.
Never work immediately adjacent to a swimming pool or garden pond with electrical equipment.
Comply with local quiet periods in your community!
Electrical
Asafety
Check the power cable regularly for damage and signs of wear.
Only use permitted extension cables.
Unplug the mains plug immediately if the mains cable / extension cable is damaged or severed.
GB
F
Warranty
The manufacturer warrants its products for exclusively
24 months from the date of origi- nal purchase. This warranty does not affect statutory warranty claims. The warranty covers all substantial faults of the product, which are caused by defects in material and workmanship. If a product exhibits such a defect we will, at our option, repair or replace it without cost for parts and labour provided the fol- lowing requirements are fulfilled:
.The product must have been sold to the customer in a legally correct way.
.The original receipt with the cus- tomer’s address, date of pur- chase, model and product desig- nation is presented as proof of purchase. The product must have been purchased within the EC.
.The product was handled proper- ly and according to the recom-
mendations in the operating instructions. It is essential that the product has been maintained and cleaned according to the information in the operating instructions. No attempt to disas- semble or repair the product has been made by either the buyer or an unauthorised third party.
.It must be ensured that only origi- nal replacement parts and origi- nal accessories approved by the manufacturer are used. There may be an increased risk of conse- quential damage and accidents if
.The product must be either taken directly or sent with postage paid to an authorised service centre.
The original receipt must be sent with the product.
.The warranty does not cover damage from misuse, abuse, use
of unsuitable,
The products contain various com- ponents that are subject to normal or
In particular the following compo- nents relating to this product are excluded:
Blades / blade bar / drive belt / care roller / blade roller / lower blade / cutting plate / cutting line / cutting head cover / saw blade /
The manufacturer warranty does not affect existing warranty claims between the customer and the dealer / seller.
4. Informations sur le mode d’emploi
Veuillez lire attentivement ce mode d’emploi, respecter les informations
et les consignes de sécurité fournies.
ses éléments de réglage et son em- ploi correct à l'aide de ce manuel.
21