Hose

Heat Shield

Burner Venturi

Side

Burner

Valve

Valve

Nozzle

Side

Burner

Control

Knob

Bezel

Step 15

Attach the hose heat shield to the right side of the cart frame using two #8 self-tapping screws.

Step 16

Remove two bolts and washers from the side burner valve. Insert the side burner valve assembly through the hole in the side burner table base, then firmly seat the valve nozzle into the burner venturi. Hold in place while you perform Step 18.

Warning: Never use your grill without leak testing all gas connections and hoses. See the section on “Leak Testing” in this manual for proper procedures.

Step 17

Place the bezel over the control knob mounting stem and position over holes in side burner base and side burner valve assembly. Attach with two M4 bolts with spring washers which come with valve. Then install the side burner control knob onto valve stem.

28

Page 29
Image 29
Brinkmann ProSeries 2310 owner manual Hose