6. Installing your child seat (forward facing) with adult belt
6a | 6b |
6c | 6d |
6e | 6f |
6g | 6h |
Adjusting the child seat
To stow away the harness in the child seat, first place the child seat on the floor.
Push the adjuster button in and at the same time pull BOTH shoulder straps forward as far as possible (dia 6a).
Turn the seat around. Lift the harness adjuster at the back of the seat and move it up so that the shoulder strap slots in the headrest are in the uppermost position (dia 6b).
Unhook both shoulder straps from the yoke at the back of the child seat (dia 6c), stow the yoke on the lower part of the belt shield 
(dia 6g).
Remove the chest pads from the chest pad attachment arms (dia 6c inset). Pull both the shoulder straps and the chest pads through to the front of the seat, remove the chest pads from the shoulder straps.
Place the child seat on it’s back. Remove the adjuster strap from the bracket of the crotch strap. Turn the bracket so that it will go through the crotch strap and push it through to the front of the seat (dia 6d).
Stand the child seat upright and release the harness from the buckle (dia 6e inset). Push the harness straps and buckle tongues under the cover through the lap belt slots (dia 6e).
Place the buckle, harness straps and chest pads in to the elastic stowage straps (dia 6f). Push the adjuster strap through the slot in the cover.
Support the seat and squeeze the headrest adjuster at the rear of the headrest (dia
6g). Check that the chest pads have been removed as directed in (dia 6c) above.
Move the headrest up so that the head is positioned centrally (dia 6h). When the headrest is in the correct position let go of the headrest adjuster, check that it has locked in to place.
