Britax BB0-702-00 manual Installing your child seat rearward facing in front seat, Dia 4c

4. Installing your child seat (rearward facing) in front seat

4a

4b

4d

IMPORTANT - The child seat MUST only be used with a lap or a lap and diagonal seat belt (approved to UN/ECE regulation no. 16 or equivalent standards).

Push the vehicle front seat back to accommodate the child seat ensuring that any passenger directly behind will still be able to sit in a comfortable position.

With the footprop adjusted to the shortest length, place the child seat rearward facing with the swinging base resting against the back of the vehicle seat (dia 4a).

IMPORTANT - DO NOT rest the back of the child seat on the dashboard or close to the windscreen.

Open both lock-offs. Pull off sufficient

4c	lap and diagonal belt (approx. 600-
	900mm). Feed the belt through the
	lock-off belt guide on the side opposite
	to the buckle and in to the belt tunnel
	(dia 4b). There are two access slots in
	the seat cover to aid feeding of the belt
	through the belt tunnel and underneath
	the seat cover (dia 4b inset).
	Feed the seat belt through the belt
	tunnel and lock-off on the opposite side
	and attach the tongue into the buckle
	(dia 4c).

Pull all the seat belt slack through the child seat ensuring the seat belt is not twisted. When the belt is as tight as possible, close the lock-off on the seat belt buckle side, ensuring that both the lap and diagonal sections of the belt are secured by it (dia 4d inset).

Close the lock-off on the opposite side, ensuring that only the lap section of the belt is secured by it (dia 4d).

Ensure that both lock-offs have been clicked into place.

4e

If the buckle now lies in the position marked as wrong with a and the seat belt cannot be correctly tightened (dia 4e), try another seating position in the car.