GB Important!
9-25kgs Group 1-2 (approximate age 9 months - 6 years)
You must ensure that you follow these instructions carefully and correctly. If this seat is not
fitted securely and your child is not strapped in correctly, your child and other passengers are at serious risk of injury in the event of an accident
Please read this User Guide carefully BEFORE trying to install your child car seat.
The Hampshire Trading Standards Authority and Britax advise that child car seats should not be bought or sold
After an accident, the child seat and your car seat belts should be replaced. Although they may look undamaged, if you were to have another accident the child seat and your car seat belts may not be able to protect your child as well as they should.
No child seat is escape proof
Harness systems cannot be designed to be completely “child proof” and yet comply with the legal requirements of European Standard ECE R44. The harness must be fastened and adjusted correctly at all times and children encouraged to remain within the harness system.
Looking after your child seat
Food and drink may find their way inside the buckle of the harness. This can stop it from working properly – it will not click. Wash in warm water until clean (dia A and B).
A
B
Cleaning the cover
Please read the labels on the cover for
washing instructions.
DO NOT tumble dry the cover – short spin and drip dry only.
Cleaning the harness and seat shell
Sponge clean ONLY using hand soap and warm water.
DO NOT take apart, or attempt to take apart, any part of the harness or seat when cleaning.
DO NOT use solvents, detergents or
DO NOT lubricate or oil any part of the seat.
Removing and refitting the cover
Press in and hold the harness release button and with your hand below the chest pads pull BOTH shoulder straps forwards as far as they will go.
Pull the yoke out from behind the seat and unhook both shoulder straps.
Pull the cover from the top of the seat and use the method shown to bring the straps to the front of the seat (dia 6c). Unfasten the buckle and remove the comfort pad by unfastening the hook and eye strip. Slide the chest pads off of the shoulder straps. Gently pull the cover off the seat, easing the shoulder straps, harness buckle and adjuster strap through the slots in the cover.
To refit the cover, perform the process in reverse. Make sure the straps are not twisted.
