Brocade Communications Systems RFS6000 manual Rack mount instructions

4 Rack mount instructions

Rack mount instructions

To install the Mobility RFS6000 Controller in a rack:

1.The rack mounting brackets are installed at the factory. No additional steps are needed.

2.Attach the brackets to the rack using screws appropriate for your rack’s mounting holes.

Mobility RFS6000 Controller console port setup

To add the Mobility RFS6000 Controller to the network and prepare it for initial configuration:

1.Using the supplied console cable (pictured below), connect the Mobility RFS6000 Controller serial port to an RS-232 (DB-9) serial port on a separate computer (the “configuration computer”).

20	Brocade Mobility RFS6000 Controller Installation Guide
	53-1001573-03