ALTERNATE MATCH LIGHTING
1.Turn the burner control knobs clockwise to the OFF position.
2.Turn ON gas at the source.
3.Open the grill lid.
4.Locate the Ignitor Rod, which is permanently attached to the inside of the right surround side.
5.Insert an unlit match into the coiled end of the ignitor rod. Light the match.
6.Insert the ignitor rod through the right hole located on the flame tamers of the grill. Position the match near the front corner of the burner. See Figure 14.
7.Turn the left burner control knob counterclockwise to HI.
8.If the burner fails to light after 5 seconds, turn the burner control knob OFF for five minutes then repeat the procedure.
9.If the burner continues not to light, turn OFF all gas and refer to the troubleshooting section of your grill Owner’s Manual.
Figure 14
Page 14 |
