SURROUND ASSEMBLY
1.The grill is shipped with the surround and the grill head at- tached by four screws as shown in the drawing below. Please remove the four screws to seperate the surround from the grill head. See Figure 1.
3.Secure the SBB surround to the enclosure using up to eight screws (not provided). See Figure 3.
Note: If you have a masonry structure you may need to substitute for the appropriate masonry fasteners.
Figure 3
Figure 1
2.Place the SBB surround into position in the constructed enclosure. See Figure 2.
Figure 2
Page 11 |
