13 |
| Assembly |
|
|
Headlight | 15 | Steering |
| |
|
|
| ||
|
|
|
| |
|
|
| Column |
|
| Handlebar |
|
|
|
| Wire Harness |
|
|
|
|
| Square |
| Vehicle |
|
| Opening |
| Body |
| Guides |
|
|
|
| Handlebar |
|
|
|
|
| • Insert the curved end of the steering column through the | ||
• Turn the handlebar assembly upside down. | square opening in the vehicle body. |
| ||
|
|
| ||
• Align the handlebar wire harness with the guides on the | • Rotate the square bushing 1/4 turn to slide it over the | |
tabs on the steering column and into the square opening | ||
underside of the handlebar and the guide at the bottom | ||
in the vehicle body. | ||
of the headlight. | ||
|
•Push firmly on the handlebar wire harness near each of the guides to secure the wire in the underside of the handlebar assembly.
•Set the handlebar assembly aside.
14 |
Steering |
Column |
Square Bushing |
•Wipe the steering column with a paper towel to remove any dirt or oils.
•Slide a square bushing onto the straight end of the steer- ing column.
16 | Guides |
| Steering |
| Column |
Steering |
|
Linkage |
|
| Hole |
•Turn the vehicle body on its side.
•Insert the curved end of the steering column into the hole in the steering linkage. Make sure the steering column is positioned between the guides on the underside of the vehicle body.
12
