H
Battery Installation
Important Note: Use only a Power Wheels® 6 volt
(4 Amp/hr.) battery with a Power Wheels® 25 amp fuse installed. Use of any other battery or fuse will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels® 6 volt charger before operating your vehicle for the first time. Charge the battery for at least 18 hours after each use of the vehicle. Never charge the battery longer than 30 hours. Failure to follow these instructions may damage your bat- tery and will void your warranty.
1
25 Amp | Battery |
Fuse |
|
| Protective |
| Foam Pocket |
| Battery |
| Connector |
•Fit the battery into the protective foam battery pocket.
•Place the battery upright in the battery compartment. Do not place the battery in the battery compartment without the protective foam pocket. Make sure the battery connector extends toward the rear of the vehicle.
•Make sure a Power Wheels® 25 amp fuse in good condition is installed in the battery.
2 |
Battery |
Retainer |
Battery |
•Position the battery retainer over the battery with the ends of the battery retainer aligned with the screw holes in the vehicle body.
•Insert two #8 x 7/8" screws through the ends of the bat- tery retainer and into the vehicle body.
•Tighten the screws with a Phillips screwdriver. Do not
16
