Flag Mode

Labels printed using this Label Type mode can be wrapped around cable or wire with the ends stuck together to form a flag. With the FLAG Label Type mode, each block of text is printed at both ends of separate labels. The length of the unprinted part of this label is equal to the circumference of the cable or wire. In addition, the text can be printed horizontally or rotated 90°.

ROTATE

 

 

 

 

 

 

 

 

 

ROTATE

 

 

 

 

 

 

 

 

 

set to

 

 

 

 

 

 

 

 

 

set to

 

 

 

 

 

 

 

 

 

OFF

 

 

 

 

 

 

 

 

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Flag

Flag

Flag

 

Flag

Flag

Flag

 

length

diameter

length

 

length

diameter

length

After selecting the FLAG Label Type mode, specify the length and diameter of the flag, a frame style if desired, and whether or not to rotate the text.

FLAG (flag diameter): 0.00" to 4.00" (0 to 100 mm) Default: 0.25" (7 mm)

FLAG LEN (flag length): 0.40" to 8.00" (10 to 200 mm) Default: 1.20" (30 mm)

FRAME:OFF, 1 , 2 , 3 , 4 Default: OFF

ROTATE:OFF, ON

Default: OFF

A single block of text can contain a maximum of 7 text lines.

For labels to be attached to cables and wires, we recommend using Flexible ID Tape. To wrap Flexible ID Tape around cylindrical objects, use the FLAG Label Type mode when the diameter of the object is less than 1/8" (3 mm). In addition, the flag length should be at least 3/16" (5 mm).

Label Type Modes

11