Brother 1400 CODE, INPUT WHOLE, CUTTER ERROR, CHOOSE COPIES, LESS THAN 1000, LABEL TYPE MODE, OF LINES! 5 MAX, OF LINES! 3 MAX, OF LINES! 2 MAX, CHECK SETTING IN

Error Message		Cause		Solution
	•	This message appears if you	•	Select a different Label
		try to change the settings for		Type mode.
CHECK SETTING IN		the Length function or
		Frame function after a Label
LABEL TYPE MODE!
		Type mode with a preset
		label length or frame has
		already been selected.
On 3/4" (18 mm) tape:	•	This message appears if you	• Reduce the number of lines
CHECK THE NUMBER		try to print or use the		or install a wider tape.
OF LINES! 5 MAX		Preview function when the
		number of lines in the text is
On 1/2" (12 mm) tape:		greater than the maximum
CHECK THE NUMBER		possible for the installed
OF LINES! 3 MAX		tape.
On 3/3" (9 mm) and 1/4" (6
mm) tape:
CHECK THE NUMBER
OF LINES! 2 MAX
	•	This message appears if	•	Select less than 1000 copies.
		more than 1000 copies were
CHOOSE COPIES		selected with the Print
		Option functions.
LESS THAN 1000!	•	Note the number of copies
		plus the number of
		sequential labels cannot
		exceed 1000.
	•	This message appears if the	•	Release the tape cutter
		tape cutter button was		button. If pwas pressed,
		pressed in when pwas		press fto feed out any
CUTTER ERROR!		pressed or the tape was		printed tape.
		being fed.	• If the problem cannot be
				corrected, contact your
				service representative.
INPUT WHOLE	•	This message appears if the	•	Input the correct number of
		required number of digits is not		digits or change the bar code
CODE!
		entered in the bar code data.		protocol.

42