Brother 1400 AUTO, Cause, RANGE, Length, NO TAPE, Solution, NO FILES, XX BLOCK, XX BLOCK, MIN 4 DIGITS, VALUE OUT OF, Error Message, TEXT TOO HIGH, TEXT TOO LONG

Error Message	Cause		Solution
	• This message appears if less	• Enter a minimum of four
MIN 4 DIGITS!	than the minimum four		digits before pressing
	digits are entered as the bar
			n.
	code data.
	• This message appears if no	• Store a text file before trying
NO FILES!	files are stored in the		to recall or delete one.
	memory when you try to
	recall or delete one.
	• This message appears if no	• Install a tape cassette and try
NO TAPE!	tape cassette is installed		again.
	when you try to feed the
	tape, print or use the
	Preview function.
TEXT TOO HIGH!	• This message appears if the	• Reduce the size of the
	size of the text is larger than		characters, install a tape with
XX BLOCK	the width of the installed		a greater width, or select the
	tape.		AUTO text size setting.
	• This message appears if the	•	Press A, and then select a
TEXT TOO LONG!	length of the text is longer		longer label length.
	than the label length that has
	been set with the Length
	function.
TEXT TOO LONG!	• This message appears if you	•	Select a longer block length.
	try to print a label that is
XX BLOCK	longer than the specified
	block length.
	• This message appears if the	• Type in a value that is within
	value entered while setting		the allowable range.
	the Margin, Length, and
VALUE OUT OF	Block Length function is not
	within the allowable range.
RANGE!
	• This message appears if the
	values for the blocks to be
	printed is not within the
	allowable range.

44