4 - 5
3
3.SPEAKER
Press Stop/Exit.
OR
If you are using Hook, you can adjust the speaker volume while dialing. You can turn the speaker off or you can select a speaker volume level. The default setting is the lowest volume.
Press High or Low to adjust the volume level. With each key press, the volume changes as the LCD shows the active setting. The new setting will remain until you change it again.
Setting the Speaker Volume
1 Press Menu, 1, 4, 3.
2 Press or to select your setting (LOW, MED, HIGH or OFF), and then press Set.
When the LCD shows the setting you want, press Set. Press Stop/Exit.
1
2
3
4
3
1.RING
Press Menu, 1, 4, 2.
Press Stop/Exit.
OR
You can adjust the ring volume when your machine is idle. You can turn the ring OFF or you can select a ring volume level.
Press High or Low to adjust the volume level. With each key press, your machine rings so you can hear the active setting as the LCD shows it. Each key press changes the volume to the next setting. The new setting will remain until you change it again.
Setting the Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The default setting is LOW. When the beeper is set to LOW or HIGH, the machine beeps every time you press a key or make an error and when fax sending or receiving is finished.
Setting the Ring Volume
1 Press Menu, 1, 4, 1.
2 Press or to select (OFF, LOW, MED, or HIGH) and press Set.

Press or to select your setting.

I N I T I A L S E T U P