10. Network Scanning (Not available for DCP-8060)
166
Scan to Image 10
When you choose Scan to Image, your document will be scanned and sent directly to the Macintosh® you
designated on your network. ControlCenter2 will activate the default graphics application on the designated
Macintosh®. You can change the Scan configuration. (See Image (example: Apple PreView) on page 147.)
aPut the document face up in the ADF, or face down on the scanner glass.
bPress (Scan).
cPress a or b to choose Scan to Image.
Press OK.
If your machine is a MFC-8460N, go to Step e.
If your machine is a MFC-8860DN, MFC-8870DW or DCP-8065DN, go to Step d.
dPress a or b to choose 2sided (L)edge, 2sided (S)edge or 1sided.
Press OK.
Note
If you want to scan a document using the duplex scanning feature, you need to put the document in the
ADF and then choose 2sided (L) edge or 2sided (S) edge depending on your document layout.
ePress a or b to choose the destination Macintosh® you want to send to.
Press OK.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination
Macintosh® on the control panel.
Press OK.
The machine will start the scanning process.