4. Network Scanning (For models with built-in network support)
79

Using the Scan key

(For models that support duplex scanning) 4
If you want to scan a document using the duplex scanning feature, you need to put the document in the ADF
and then choose 2sided (L) edge or 2sided (S) edge depending on your document layout.
Choose your document layout from following table:
Document Layout Table
Note
Duplex scan is supported by the MFC-8860DN, MFC-8870DW and DCP-8065DN only.
Duplex scan is available from the ADF only.
Duplex scan is not available for legal size paper.
Scan to E-mail (PC) 4
When you choose Scan to E-mail (PC) your document will be scanned and sent directly to the PC you
designated on your network. ControlCenter2 will activate the default E-mail application on the designated PC.
You can scan and send a black and white or colour document from the PC as an attachment.
You can change the scan configuration. (See E-mail on page 63.)
aPut the document face up in the ADF, or face down on the scanner glass.
bPress (Scan).
cPress a or b to choose Scan to E-mail.
Press OK.
If your machine is a MFC-8460N, go to Step f.
If your machine is a MFC-8860DN, MFC-8870DW or DCP-8065DN, go to Step d.
Portrait Landscape LCD Message
Front Back Front Back
(L)edge
(Long edge)
Front Back Front Back
(S)edge
(Short edge)