Brother 885-S61 Saving stitch settings, Press , , and arrow keys until Is selected 4Press OK key

SEWING BASICS ———————————————————————————————————————————————————

XAfter reverse/reinforcement stitches are sewn, the sewing machine stops and cuts the thread.

The thread is cut here.

Memo

●Reverse/reinforcement stitches will not be sewn and the thread will not automatically be cut if the start/stop button is pressed at the end of the stitching. Be sure to press the reverse/reinforcement stitch button at the end of the stitching.

Saving stitch settings

Adjusted stitch width and length settings can be saved so that they will be specified each time the stitch is selected. The various settings can be saved for each utility stitch.

1Select the stitch, and then adjust the stitch width and length.

To adjust the stitch width, press (–) and

(+). To adjust the stitch length, press (–) and

(+).

•For details on selecting a stitch, refer to “Selecting stitching” (page 68).

XThe stitch width and length are changed.

2Presspanel. (settings key) in the operation

XThe settings screen appears.

3Press , , and (arrow keys) until

is selected.

4Press (OK key).

XThe screen for saving the settings appears.

5Check the is selected, and then press (OK key).

XThe settings for the stitch width and length are saved.

60