Brother 885-S61 operation manual Satin stitching, Connect the foot controller

UTILITY STITCHES ——————————————————————————————————————————————————

7After sewing is finished, slide the drop feed

lever to (to the left as seen from the front of the machine) and turn the handwheel to raise the feed dogs.

1

1Back side

•Normally, the drop feed lever is positioned at the left.

Satin stitching

A decorative stitch can be sewn by changing the stitch width of a satin stitch. If the sewing machine is set so that the stitch width can be adjusted using the sewing speed controller, the stitch width can quickly and easily be adjusted. In this case, the sewing speed is adjusted with the foot controller.

1Connect the foot controller.

•For details, refer to “Starting to sew” (page 49).

2Attach zigzag foot “J”.

J

•For details, refer to “Replacing the presser foot” (page 37).

3Turn on the sewing machine, and then press (settings key) in the operation panel.

XThe settings screen appears.

4Press , , and (arrow keys) until

is selected.

5Press (OK key).

XThe screen for specifying that the stitch width can be controlled with the sewing speed controller appears.

6Press to select .

To return to , press .

X The machine is now set so that the stitch width can be controlled with the sewing speed controller.

98